Other

$29.95
- CNC-machined 6061-T6 aluminum with titanium hardware
- Zero-friction cam surface treatment ensures smooth lever action
- 27g

$20.00
- Compatible with Super Record, Record, and Athena EPS systems
- Required for use with the charger and works with V2 systems
- USA/North America plug - adapters required for other countries

$20.00
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount.
- Fits external seat post diameters from 30.9 - 31.6mm
- Not compatible with the V2 Power Unit

$20.00
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.

$27.00
Low viscosity mineral oil for use with Campagnolo hydraulic brake systems.
- Will not damage frame finishes
- Does not absorb water so regular bleeding is not necessary
- Non-toxic and will not irritate skin

$35.00
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount.
- For mounting the V3 power inside the seat tube using the water bottle screws
- Not compatible with the V2 Power Unit

$180.00
In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit.
- New shape with LED indicators on 3 sides
- Battery charges through the Interface Unit, no more need to drill a charging port hole in the bicycle frame
- Contains a wireless module allowing for connection to PCs, smartphones, tablets, etc., through ANT+ and Bluetooth Low Energy (BLE). Requires the use of Android 4.3 or newer, or iOS 8 or newer
- Only compatible with Campagnolo Super Record and Record V3 Power Unit
- Waterproof to 1m for 30 minutes (IP67 Rated)
- Weathertight, o-ring sealed connectors
- See PDF for complete details on the V3 app and customization

$0.90
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit.
- Composite construction

$7.50
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

$9.00
Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive.
- Spacers can be cut to fine-tune spring curve

$14.00
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values.
- Bearings not included
- Stack height: 9mm

$24.00 - $49.00
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

$30.00
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values.
- Bearings not included
- Stack height = 9mm

$49.00
Slamset top headsets are designed to keep the stack height low.
- Hellbender bearings with improved seal structure

$54.99
The OPT remote allows instant engagement of Cane Creek's Climb Switch on Double Barrel rear shocks, giving the rider precise control of traction and climbing feel.
- Hard anodized for durability
- Requires brake cable and housing for installation
- Bottom mount for below bar engagement or top mount for above bar
- Compatible with DBinline, DBAir IL, and DBCoil IL shocks only

$130.00
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability.
- Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
- Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP
- Compatible with Fox coil shocks with required spring clip adaptor

$29.95
- Simple tension seeker (STS) allows the use of a 1 speed drivetrain on a vertical drop frame
- Perfect for street or dirt jump where simplicity and durability is key
- Stainless steel arm mounts to derailleur hanger and dropout
- Loosen bolt and swing down and back to adjust chain tension
- High density polyurethane pulley with sealed cartridge bearings

$13.49
- Specially shaped composite material helps prevent chain derailment when shifting to inner ring
- Split clamp design mounts to specific seat tube diameters, eliminating the need for a metal fitment clamp

$29.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase
- Forged 6061 aluminum
- Threaded alloy top cap

$39.99
- Clamps to a threadless steerer
- Offers up to 4-1/2" stem height increase
- Forged 6061-aluminum provides extra strength
- Machined aluminum top cap is threaded, providing easy installation

$1.25
Dimension Anodized M5 Bolts fits most standard bottle boss and accessory mounts.
- Fits most standard bottle boss and accessory mounts
- Tapered socket head with 4mm broach M5 diameter bolt, 0.8mm thread pitch
- 16mm thread length
- Aluminium
- Sold individually

$23.99
Dimension Stem Column Adaptors
- Total quill length 180mm
- Measurement from minimum insertion to top of steerer adaptor is 118mm
- Alloy
- Quill insertion diameter: 1-inch

$35.99 - $43.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer.
- Extender clamps to steerer; stem clamps to extender
- Adds 2 to 3-1/4-inch height to threadless steerer
- Includes top cap and long bolt
- 40mm of threadless steerer is required for proper installation
- Do not stack steerer extenders; no more than one steerer extender recommended per bike
- WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers

$20.00
A seatpost retention plug that holds an electronic shifting system battery securely inside ENVE carbon seatposts. Electronic shifting is the gold standard and more bikes are coming equipped with these groups. Housing the battery into the seatpost is an elegant solution and a good use of space. Available in 25.4, 27.2, and 30.9/31.6mm sizes, these plugs are designed to provide excellent battery retention and interface perfectly with ENVE carbon seatposts.

$25.00
A perfect complement to your ENVE cockpit and fork. The ENVE compression plug keeps your ride straight as an arrow and looking good.

$8.99
Keep adhesives off your bike!This is the finishing tape included in our RCT Wrap Kits! If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products.

$9.99 - $15.99
Electra's Townie Quick-Release Seatpost Collar offers a little extra bling and convenience to your Townie bike because it allows no-tools seat-height adjustment. This quality metal clamp is easy to install and use and it securely fastens your seatpost in place.

$39.99
Make sure your bike is looking fresh with Electra's Delivery 3i Wood Tank Plate. The clear polish accentuates the natural wood grain and protects it from weather so your tank plate looks great for years!

$28.00
- Blue polyurethane upgrade dust wipers and oil seals
- Dual lip offers improved seal with lower stiction
- Fox 32mm and 36mm kits include wipers, oil seals, crush washers, and foam rings
- Fox 40mm kits include wipers and seals

$4.95
Replacement endplugs for Ergon's GD1 grips. Three colors available that are matched to the SMD2 Comp saddle.
- Uses: downhill, freeride, gravity disciplines

$2.99
Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.

$3.99
Weight-savings is no excuse to have an ill-fitting cockpit. Shave every possible gram with these Carbon Headset Spacers from FSA, and ensure your bike fit is right on the money.

$4.99
It seems so small and insignificant, yet it's so important. The BB30 Wave Spring Washer is the keystone in your bottom bracket assembly, providing compression for proper setup and bearing preload, while helping to maintain adjustment after it's dialed in just right. They're also quite easy to lose or damage, so grab a few while you're at it.

$4.99
ISIS cranks have been around a long time, and they're still a great design. If you've got one, keep it in top working condition with these quality crank bolts from FSA.
- ISIS-compatible
- M12

$5.99
Snap rings are pretty ingenious, except they love to launch in an impossible-to-track direction when removing or installing. Maybe you should keep a spare set of these BB30 Inner Snap Rings, just in case.

$6.59
- Super light carbon spacers for tuning stem height
- Spacers are internally weight relieved to drop a few extra grams

$9.49
- Microspacers ensure the correct fitment of integrated headsets
- Use between the top cover and the compression ring to ensure the top cover does not contact the headtube
- Sold in bags of 10

$9.99
Your frame is BB30 or PF30. Your crank is 386EVO. No sweat. This adapter from FSA makes it happen.
- For road use
- Weight: 50g

$10.99
The perfect bike fit is priceless. These FSA Polycarbonate Headset Spacers, however, are very affordable, and an easy way to dial in that fit for optimum performance and comfort.

$11.99 - $12.99
Keep that front end tight and responsive, while preserving the integrity of the carbon steerer on your high-end fork with FSA's Headset Compression Plug.
- Alloy top cap
- For carbon steer tubes

$12.99 - $14.99
Dial in the perfect cockpit by spacing your stem with these lightweight, easy-to-install Aluminum Headset Stack Spacers from FSA.

$12.99
This is an FSA MegaExo Crank Arm Fixing Bolt for MegaExo Cranks.
- 26mm length
- 12g
- Designed to fit FSA cranks only
- Includes M18 bolt, M27 self-extracting cap and washers

$12.99
This is an FSA MegaExo Crank Arm Bolt for 19mm MegaExo alloy cranks
- Designed to fit alloy FSA cranks only
- Includes M12 bolt, M27 self-extracting cap, and washers

$12.99
This is an FSA MegaExo Crank Arm Bolt for 24mm MegaExo alloy cranks
- Designed to fit alloy FSA cranks only
- Includes M17 bolt, M27 self-extracting cap, and washers

$12.99
This is an FSA Self-Extracting Left Crank Arm Bolt for Mega Exo ATB Cranks
- 30mm long
- 14g
- Designed to fit FSA ATB cranks only
- Includes M18 bolt, M27 self-extracting cap and washers

$14.99
This pair of spacers from FSA adapts a 386 EVO crankset to a 68mm BB30 or PF30 frame using the existing BB30/PF30 bottom bracket designed for your frame.
Page 1 of 12
Next page