Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.
Need to replace a strap on the compact Vis 180 Pro taillight or the front mount of the Vis 360 Pro? This is a durable direct replacement that installs in seconds and can be cut to the preferred length.
$4.00 $8.00 50% Off
Giant's Numen Mini Headlight is small, powerful, and surprisingly bright. It's so light, you can just leave it on your bars and you'll barely notice it, while drivers will notice its 2 bright LEDs as they illuminate your way. This nice light has a flexible rubber mount so you can attach it almost anywhere on your bike. It has steady and flashing modes and runs up to 100 hours on its included batteries.
$4.00 $8.00 50% Off
Giant's Numen Mini Taillight is small, powerful and surprisingly bright. It's so lightweight, you can just leave it on your bike where drivers will notice its 2 bright LEDs. This nice light has a flexible rubber mount so you can attach it almost anywhere on your bike. It has steady and flashing modes and runs up to 100 hours on its included batteries.
- Replacement taillight mount for Numen lights
- Mounts Beamer and Blaze 1/2W lights to a helmet - Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB - Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet
The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
- Replacement aero mount for Numen light
- Replacement handlebar mount for Numen lights
Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.
SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights
- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists
$5.99 $22.99 74% Off
Bringing a rear light along is easy with Blackburn's magnetic Mars Taillight. - Red LED flashing light - 50 hours flash time - Strap to seat post - Clasp to sleeve - Wrap around dog collar
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal
- Quick Strap mounts, adjusts or removes in seconds without tools - Fits 25.4-35mm handlebars - Compatible with Blazes, Beamers, 1200 and Super Spot
- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot
- Compatible with seatpost diameter 20mm-36mm - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal - Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light
Replacement Part – TST Tail Light Saddle Rail Mount Allows mounting of tail light direct to saddle rails. Compatible With: TST-70 TST-100 TST-150 TBT-50R
$6.95 $10.00 30% Off
High-efficiency charger cable for Flux headlights. - High capacity wire can transfer more power with less loss. - Custom "L" shaped Mini USB Male for the best fit to Flux headlights. - NOTE: This is a CHARGE ONLY cable and cannot be used for data transfer.
USB cable for charging NiteRider® bike lights that utilize a micro USB charge port connection System Compatibility - All Lumina Series - Swift Series - MiNewt Cordless Series - MiNewt Mini Series - Lightning Bug 120 - Sentinel - Solas - Omega - Sabre - Sentry Aero - Stinger
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.
-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter
Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP
Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.
$9.95 $15.00 34% Off
Replacement clear lens for Flux Elite Headlight. - Includes clear lens and gasket.
- Be safe and be seen with hi-viz red LED safety lights - 360-degree visibility with rapid blink, slow blink, and full glow LED modes - Sweat-proof, water resistant design moves with you - Lightweight material for ultimate comfort - Dimensions: 2.68cm x 3.03cm x 1.02cm
The versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne KTV Pro, Power XL, Macro XL, Hecto XL and Micro XL Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.
Set up a light wherever you can connect a GoPro mount. Use this adapter to connect your Imjin or Nip to any GoPro mounting option.
Setup a light wherever you can connect a GoPro mount. Use this adapter to connect your Taz to any GoPro mounting option.
Page 1 of 8 Next page