Filter By:
- Parts & Accessories (66)
- Pedals (189)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Pedals
$1,199.99
Rally XC200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes.
- Advanced Cycling Dynamics—In addition to total power and cadence, Rally XC200 measures much more. These metrics help you identify your strengths and weaknesses, so you can work to improve.
- Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power.
- Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness.
- Power Phase—Get a clear look at where you're producing power in the pedal stroke.
- Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal.
- Cleat Compatibility—For a comfortable ride, these pedals are designed to fit your favorite Shimano SPD cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4)
- Battery life: up to 120 hours (with LR44 battery type)
- Weight: 316g
- Water resistance: IPX7
- Max. rider weight: 105kg
- Accuracy: +/- 1.0%
- Cleat type: Shimano SPD
- Q-factor: 53/55mm with supplied spacing washer
- Stack height: 13.5mm
- Field calibration
- Adjustable release tension
- Garmin Connect
- Measurement location: Spindle
- Communication: ANT+ and Bluetooth
In the Box:
- Rally XC200 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$1,099.99
Rally RK200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes.
- Advanced Cycling Dynamics—In addition to total power and cadence, Rally RK200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve.
- Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power.
- Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness.
- Power Phase—Get a clear look at where you're producing power in the pedal stroke.
- Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal.
- Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite LOOK KEO cleats in mind.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 326g
- Water resistance: IPX7
- Cleat type: KEO
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RK200 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$1,099.99
Rally RS200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes.
- Advanced Cycling Dynamics—In addition to total power and cadence, Rally RS200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve.
- Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power.
- Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness.
- Power Phase—Get a clear look at where you're producing power in the pedal stroke.
- Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal.
- Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite Shimano SPD-SL cleats in mind.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 320g
- Water resistance: IPX7
- Cleat type: SPD-SL
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RS200 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$1,099.00
Designed for cyclists with exacting standards, X-Track Dual Power pedals are the perfect option to get the most out of each training session and race, whether you're riding an MTB or gravel bike. With a power meter inside each axle, they provide accurate data in all conditions, including the most extreme, and feature a market-leading weight/contact area ratio. Approved by experienced athletes, they are hard-wearing, reliable, efficient and Made in France: the perfect pedals on any terrain.
- Dual power transducers for accurate, comprehensive data
- An accurate power meter in a pair of efficient SPD compatible pedals
- Aluminum body, Stainless Steel platform and steel bearings
- Lightweight (404 g) with all-terrain efficiency
- Installed and set up in minutes
- Totally weatherproof and splashproof
- Standard Cleat included with 6 - 14Nm retention
- 3 year warranty
$759.00
For gravel or mountain biking, the integrated power meter of the X-Track Single Power pedals allow you to optimize your effort, then to analyze your training and race data. Featuring an outstanding weight/contact area ratio, they are incredibly efficient on technical rides and designed to withstand the toughest conditions. A simple, reliable and accurate tool to measure your effort, combined with SPD-compatible pedals offering outstanding performance.
- Single power transducer for accurate, comprehensive data
- An accurate power meter in a pair of efficient SPD compatible pedals
- Aluminum body, Stainless Steel platform and steel bearings
- Lightweight (404 g) with all-terrain efficiency
- Installed and set up in minutes
- Totally weatherproof and splashproof
- Standard Cleat included with 6 - 14Nm retention
- 3 year warranty
$699.99
Rally XC100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes.
- Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally XC100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately).
- Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4)
- Battery life: up to 120 hours (with LR44 battery type)
- Weight: 316g
- Water resistance: IPX7
- Max. rider weight: 105kg
- Accuracy: +/- 1.0%
- Cleat type: Shimano SPD
- Q-factor: 53/55mm with supplied spacing washer
- Stack height: 13.5mm
- Field calibration
- Adjustable release tension
- Garmin Connect
- Measurement location: Spindle
- Communication: ANT+ and Bluetooth
In the Box:
- Rally XC100 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$679.00
The latest generation of Keo Blade clipless road pedals now adds a new dimension to your training thanks to a power meter. Perfectly integrated inside the left pedal axle, it measures and transmits your watts and cadence in real-time. Born from of expertise and experience at the highest level, they offer outstanding dynamic performance: ultra-lightweight (260g/pair), wide contact area and great aerodynamics. An essential, straightforward, reliable and easy-to-use tool to optimize your performance when training and racing.
- Single power transducer for accurate, comprehensive data
- Quick and easy installation in 30 seconds
- The top-level performance of Keo Blade, with the added benefit of a power sensor
- Best-in-class integration, ergonomics, durability and connectivity
- Robust mechanical and electronic architecture
- Carbon fiber blade body, Stainless Steel platform and steel bearings
- Keo Grip cleats with 16Nm retention and 6 deg float
- 3 year warranty
$649.99
Rally RK100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes.
- Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RK100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately).
- Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite LOOK KEO cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 334g
- Water resistance: IPX7
- Cleat type: KEO
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RK100 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$649.99
Rally RS100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes.
- Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RS100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately).
- Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD-SL cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 328g
- Water resistance: IPX7
- Cleat type: SPD-SL
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RS100 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$599.99
Upgrade your Rally pedals to a dual-sensing power meter, and analyze more than just watts to see exactly how your pedaling style generates the force that moves you. When paired, the upgrade pedal completes the Rally power meter system, providing left/right balance data and cycling dynamics.
- Revolutionary cycling dynamics display where you’re generating power throughout the pedal stroke and show left/right balance
- See where you apply force on the pedal to ensure proper cleat position and track seated vs. standing to see how position changes efficiency
- Intended for Rally XC100
$549.99
Upgrade your Rally pedals to a dual-sensing power meter, and analyze more than just watts to see exactly how your pedaling style generates the force that moves you. When paired, the upgrade pedal completes the Rally power meter system, providing left/right balance data and cycling dynamics.
- Revolutionary cycling dynamics display where you’re generating power throughout the pedal stroke and show left/right balance
- See where you apply force on the pedal to ensure proper cleat position and track seated vs. standing to see how position changes efficiency
- Intended for Rally RK100
$450.00
Crank Brothers' Candy 11 is the pedal to sate a racer's sweet tooth. This customizable pedal boasts integrated traction pad technology to refine fit, feel and power transfer, while titanium components shave weight. A ribbed body helps your foot grab the pedal body when you've unclipped, though the four-sided entry will have you engaged and off on the first try. Rely on chamfered edges to reduce rock-strikes, and a hex alloy end cap bash guard to help minimize damage to the pedal body.
$430.00 - $440.00
The XPRO 12 SL is the ultimate expression of pedal technology, making it TIME’s lightest and most ergonomic road pedal. The XPRO 12 SL’s carbon body and proprietary design create a powerful structure to transfer power from your legs to the road. Power transfer and stability are enhanced with a larger pedal surface area of 725mm-squared compared with the already large surface area of the XPRESSO at 700mm-squared. The ICLIC system, with its pre-opened design, allows for positive engagement and greater comfort. This pedal combined with the ICLIC Float Cleat allows float (angularly and laterally) while clipped in, reducing knee strain. TIME XPRO pedals offer three options for spindle length to provide riders with more ergonomic options. Finally, the XPRO 12 SL features watt-saving ceramic bearings and a super light hollow titanium spindle, resulting in an overall weight of 87.3 grams per pedal. The carbon blade is also adjustable in three positions to optimize engagement tension. The pedal’s low stack height keeps the cyclist’s sole as close to the center of the pedal axle as possible, which, along with the large pedal surface area, results in incomparable pedaling efficiency and comfort. We recommend a maximum weight of 90kg.
- TIME’s ultimate road performance pedal, designed to be aero and light weight
- Carbon fiber body with hollow titanium spindle and ceramic bearings
- Fast and easy cleat engagement with three tension settings of the carbon blade
- ICLIC Float Cleat allows float angularly and laterally while clipped in
- Low stack height for good clearance
- ICLIC Cleats included
$389.00
KEO BLADE CARBON CERAMIC Ti pedals are the flagship model of LOOK's road pedal range. They feature carbon blade technology which bears its name, ceramic bearings and the addition of titanium spindles, creating a pedal of incomparable weight and impressive aerodynamics. These pedals are designed to win.
- New leading edge profiling for increased aero dynamics and reduced drag
- Improved sealed spindle design to resist water intrusion with dual sealed ceramic bearings and 1 needle bearing
- Better retention lever durability compared to previous design
- Easier clip-in rotation due to improved weight balance
- 3-part high grade stainless steel contact points for higher impact resistance and durability
- 64mm wide platform and 700mm² contact surface provides maximum power transfer and distribution of foot pressure
- Easy clip in/out with composite blade retention 16 (installed)
- Carbon Body, Titanium Spindle
- KEO cleats included
$350.00
The world’s most successful downhill pedal is now available in a premium edition featuring titanium wings and dual-chamfered edges to minimize weight and maximize performance. The Crank Brothers Mallet DH 11 is designed and engineered for the rider who wants the best of the best, and nothing less.
- Titanium wings for reduced weight
- Dual chamfered edges to reduce rock-strikes
- Exclusive double-anodized black and gold colorway
- Concave platform for secure foothold
- 8 adjustable pins per side for grip
- Traction pad technology customizable interface
- Ribbed body for better traction when unclipped
- 57mm q-factor for stability at speed
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
- Spindle material: forged SCM 435 chromoly steel
- Body material: 6061-T6 aluminum
- Wing material: 6AL/4v titanium
- Spring material: 300 series stainless steel
- Release angle 15° / 20°
- Max rider weight no restriction
- Q-factor 57mm
- Inner bearing type: IGUS LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Endcap hex alloy
- Cleat: Premium brass cleats with shims included
- Weight: 445 grams
$350.00
The Speciale 12 is the ultimate balance between aesthetics and performance. This grippy, lightweight, and strong pedal was developed for the demands of professional enduro, trail, and more. The Speciale 12 features an alloy anodized platform, titanium spindle, and is available in two sizes: Large (69x90mm) for downhill and Enduro, or Small (64x80mm) for trail or Enduro. The pedal is spring-retention adjustable (micrometric) to exceed the demands of the most advanced riders. The Speciale 12 features TIME’s renowned ATAC design for easy entry and mud clearance. TIME’s renowned engagement system allows easy engagement with a positive, predictable entry and release.
- Premium design and performance in all conditions for enduro, trail, and downhill
- Alloy platform body with titanium spindle
- Easy engagement and performance in all conditions
- ATAC cleat design clears mud with every step-in
- ATAC Standard Cleats included
$349.99
The Crank Brothers Mallet E 11 is the premium version of the ideal enduro racing pedal. The specs say it all.
- Titanium wings to reduce weight
- Dual chamfered edges to reduce rock-strikes
- Exclusive double-anodized black and gold colorway
- Concave platform for secure foothold
- 6 adjustable pins per side for grip
- Traction pad technology to optimize the shoe/pedal interface
- Ribbed body for better traction when unclipped
- 52mm q-factor for maneuverability on tight trails
- Hex alloy endcap for durability
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
$305.00
The XPRO 12 is the go-to pedal for top racers, thanks to its light weight and ergonomic design for countless hours of riding without pedal-induced discomfort. With its carbon body and titanium axle, the XPRO 12 is wildly light but robust. The pedal’s large 725mm-squared surface area provides efficient power transfer and vital stability, so you’re ready for sprints and explosive efforts. The pedal’s bottom fairing helps improve aerodynamics and protect the carbon blade. TIME’s patented pre-opened ICLIC system allows for fast and easy cleat engagement, so you are fast off the line. This pedal combined with the ICLIC Float Cleat allows float (angularly and laterally) while clipped in, reducing knee strain. TIME XPRO pedals offer three options for spindle length to provide riders with more ergonomic options. Tension adjustment on the carbon blade has three positions to precisely manage the pressure of the clamping mechanism. The XPRO 12 uses a titanium axle for a maximum rider weight of 90kg.
- Light, ergonomic, aero performance pedal
- Carbon fiber body with titanium spindle
- Fast and easy cleat engagement with three tension settings of the carbon blade
- ICLIC Float Cleat allows float angularly and laterally while clipped in
- Low stack height for good clearance
- ICLIC Cleats included
$295.00
The Vault Mag SL MTB flat pedals are born from DMR's quest for production methods that are more environmentally friendly and less wasteful. Thanks to the unique use of pressure die-casting technology, the Vault Mag SL achieves these goals. The combination of lightweight magnesium body and Ti Nitride axle equates to just 332g per pair. When weight and performance are paramount, the Vault Mag SL mountain bike pedal delivers.
- ED Painted black finish
- Tried and tested at pro level
- 17mm concave footbed
- Titanium Nitride Axle
- High Load DU bush system
- Replaceable steel pins
- Rider weight limit 187lbs
$295.00
The ATAC XC 12 is TIME’s lightest off-road pedal, purpose-built for quick windup and trail speed. This premier XC pedal is also designed for your comfort thanks to an ergonomic design, starting with simple clip-in thanks to a wide-angle of positive cleat engagement. Once you’re clipped in, the features of ATAC XC 12 really kick in: Freedom of movement, lateral and angular, for reduced injuries and muscle fatigue. The pedal’s self-cleaning design clears mud and debris each time you step in. Light and strong with a titanium axle and carbon body, ATAC XC 12 offers easy and consistent engagement with tension adjustment to meet your pedal preference and needs. This pedal is ideal for gravel and cyclocross as well.
- Designed for performance in off-road conditions; Ideal for cross country, gravel, or cyclocross
- Carbon fiber body with titanium spindle for light weight
- Easy clip-in and pedal engagement with self-cleaning ATAC cleat design that clears mud with every step-in
- Tension adjustment
- ATAC Standard Cleats included
$279.99
- Excellent Pedaling Efficiency
- Optimized Balance Of Weight And Rigidity
- Injection Molded Carbon Composite Body
- Hollow Cleat Bolt
- Efficient Power Transfer
- High Stability
- Extra-Wide Platform
- Efficient Power Transfer/Durability
- Reduces Flex And Pedal Body Wear
- Stainless Steel Body Plate
- Excellent Pedaling Efficiency
- Smooth Rotation
- 2-Ball Bearing, 1-Wide Roller Bushing
- Reliable Durability Performance
- Stable And Uniform Load Distribution
- Wide Bearing Placement
- Rider Tune
- Customize The Entry And Release Tension Settings
- Adjustable Entry And Release Tension Settings
- Shimano 3-Year Limited Warranty
- Average Weight: 224g
- Shimano SPD-SL cleats included
- Standard (52mm)
- Wide (56mm)
$252.00
KEO BLADE CARBON CERAMIC pedals take the BLADE series to the next level, featuring a Chromoly axle paired with ceramic bearings for even more reliability and performance. Beyond its weight, the larger surface contact area-to-weight ratio is the best in class. Light, aerodynamic and powerful, these pedals have all you need to race with confidence.
- New leading edge profiling for increased aero dynamics and reduced drag
- Improved sealed spindle design to resist water intrusion with dual sealed ceramic bearings and 1 needle bearing
- Better retention lever durability compared to previous design
- Easier clip-in rotation due to improved weight balance
- 3-part high grade stainless steel contact points for higher impact resistance and durability
- 64mm wide platform and 700mm² contact surface provides maximum power transfer and distribution of foot pressure
- Easy clip in/out with composite blade retention 12 (installed)
- Carbon Body, Chromoly + Spindle
- KEO cleats included
$249.99
Bring power to every ride, on- or off-road. If you already own a compatible Garmin pedal-based power meter (Rally XC, Rally RK or Vector 3), use this conversion kit to easily swap your power sensor to new pedal bodies for use on another bike. This kit contains all the components you need to make the switch.
NOTE: This product contains pedal bodies only, spindles and electronics are not included.
In the box:
- Left and right pedal bodies (SHIMANO SPD-SL style)
- Replacement seals
- 55 mm Q-factor washers
- Battery doors
$199.99
Shimano Ultegra R8000 pedals.
- Pro-level performance and lightweight for the enthusiast
- The legacy of Shimano design, quality and performance
- Carbon-composite body
- Extra-wide platform for a more efficient transfer of power
- Adjustable entry and release tension settings
- 4mm longer axle available
- Low stack height
- 0.7mm lower than PD-6800
- Model Number: PD-R8000
- Series: Ultegra
- Pedal System: SPD-SL
- Average Weight: 248 grams
$199.99
Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm.
Dual-Concave Profile:
- Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side.
Extra Grip:
- Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts.
Shaped with Purpose:
- The shape of Waveform Aluminum Pedals matches the footprint of your shoe
Reliable Performance:
- Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions.
Tapered Edges:
- Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain
Two sizes:
- Large: 112mm x 106mm - 384g
- Small: 105mm x 99mm - 373g
Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.
$199.95
Wolf Tooth Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric machined aluminum platform provides strong foot support for all-mountain riding, while the thin convex profile is just 7mm thick at the leading edge. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, a igus bushing, and a custom radial seal to protect internal components against trail debris.
Slim Convex Profile
Ripsaw pedals are 12.5mm thick in the center and just 7mm thick in the front and rear edges. This profile is supportive and comfortable for all riders, while performing exceptionally well for riders who prefer pedaling with a mid-foot position or for shoes that do not have much structure or support.
Extra Grip
Each side of the pedal has 12 stainless steel rear-loading 4.5mm pins for loads of traction. An additional six 4.5mm pins ship with the pedal. Shorter 3mm pins are available as replacement parts to customize the convexity of the pedal; by installing shorter pins on the edges, the convex profile is emphasized.
Formed with Purpose
The slight convex profile of the pedal body is tallest at the pedal spindle. The shape then tapers toward each edge from there. This profile aligns perfectly with the arch of your foot and provides a strong platform for power transfer.
Reliable Performance
Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions.
Precision Machining
Each Ripsaw Aluminum Pedal body begins as a billet of raw aluminum. After 37 minutes in our CNC mills, the result is a beautifully crafted pedal body that is ready for anodizing and assembly. If you’re a nerd for machining, you’ll appreciate the intricate gradients and machine paths.
$190.00
At Hope we produce products for the true riders. This means developing the best components, not only for the extremes of downhill or EWS, but also for the punishing environment of XC racing and endurance riding. Here, balancing strength, weight and performance is key and we have now applied all our years of expertise into the clipless pedal.
KEY FEATURES
- Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release
- Dual sided
- Fully CNC Machined pedal bodies
- Stainless steel clips and cleats
- Pedals supplied with two cleats options
- Large shoe/pedal contact area for maximum power transfer and stability
- Replaceable pins for increased grip on Union TC (8 pins)
- Available in black, silver, bronze, red, blue, orange and purple
- Pedals run on three cartridge bearings and a maintenance free IGUS bush for smooth long term durability
- Fully serviceable and re-buildable
- Axle is high strength Cr-Mo, heat treated and plated
- Titanium axle upgrades available
- Q-Factor – 55mm
- Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float.
- Large platform with option of 4 pins per side.
$189.99
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide.
BETTER MUD CLEARANCE
- Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence.
ADDED EFFICIENCY + DURABILITY
- Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center.
LARGER CONTACT AREA
- The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy.
BETTER MUD CLEARANCE
- Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.
$180.00
Flat or clipless pedals? The question may arise, but not anymore thanks to the GEO TREKKING commuter range of pedals. This robust aluminum pedal is flat on one side and SPD-compatible on the other, with the added security of the VISION light system for when the ride turns dark.
- Technology: Hybrid pedals = half flat + half clipless
- Cleats: X-Track Easy
- Cleats Standard: SPD compatible
- Release angle: 13°
- Retention: 5-10
- Body: Aluminum
- Traction: 8 traction pins
- Spindle: Chromoly+
- Platform width: 83mm
- Weight (pedal): 247g
- Weight (pair + cleats): 550g
- Light included: Yes (x2)
- Light modes: 3 (steady/flash/flash eco)
- Battery Life: Up to 30h (flash eco)
- Light Output: 15 lumens
- Battery: Micro USB rechargeable (cable included)
- Charging time: 50 min
- Beam angle: 180°
$180.00
Specialized's Boomslang Platform Pedals are insanely thin, yet still wickedly strong. A tapered outside pedal edge provides maximum grip and ground clearance, while the super low-profile design—a mere 10mm at the center—is like a direct telepathic line from your body to the bike. Custom undercut pins provide incredible traction and are simple to remove, and should one break during your ride, each pedal carries four hidden pins for easy replacement.
- Super slick, patent pending, spindle design
- Super low-profile design; 10mm thickness at center
- Custom undercut pins provide “clip in” style grip and easy removal
- Pedal body carriers 4 hidden pins for easy replacement of broken pins
- Tapered outside pedal edge for maximum grip and ground clearance
- Large foot platform for modern day DH, 110x108mm
Page 1 of 9
Next page