Your Search: "fox"

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements

Precision-machined anodized aluminum designed to allow for easy adjustment of the Fox DHX2/FLOAT X2 shocks requiring a 3mm and 6mm hex wrench. This small, pocket-sized tool allows for easy trail-side adjustments.

DPX2 Damper Shaft for FOX suspension service and repair. - FOX Damper Shaft - Steel, DPX2, 2pc, 0.360 ID, 0.498 OD, 3.155 TLG, 7.875 X 2.25/2.00

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - One 264mm spoke = 6g - Nipples sold separately

Don't let the sleek lines fool you. SkyLine FX is a cutting-edge roof rack with integrated crossbars and towers that has no bar overhang and is designed to support whatever you're carrying. It gives your vehicle a clean, modern aesthetic with a seamless attachment to all of our vehicle-specific Landing Pads. PRODUCT DETAILS - Integrated tower and crossbars, for a clean visual connection to the vehicle, with no crossbar overhang - Secure, easy-to-use tower specifically designed for Vehicles with Fixed Points or Tracks - Includes aerodynamic, T-slot JetStream Black crossbars - SmartFill push-down infill for easy t-slot mount attachment - Sleek tower cover styling with matte finish, tone-on-tone black logo - Easily locks to you vehicle with our SKS system (sold separately) - Multiple bar lengths available for precision sizing on various vehicle roof widths - Uses Yakima's proven Landing Pads for attachment to vehicles with fixed points or tracks - BarBed has 12° of pitch adjustment to optimize tower position and level bars PRODUCT SPECS - Weight: 5.00 lbs. - Dimensions: L 33.50 in x W 5.00 in x H 3.50 in

Built for hauling down the trail at blur speed with a look to match, the Women's Defend Race Jersey delivers podium-proven race performance with style. With TruDri fabric to wick away sweat and keep you cool and dry, the Defend mountain bike jersey is made from recycled fabrics, has a trail-specific cut, and comes with a drop tail for coverage on the move.

Built for hauling down the trail at blur speed with a look to match, the Womens Defend Long Sleeve Jersey delivers podium-proven race performance with style. With TruDri fabric to wick away sweat and keep you cool and dry, the Defend mountain bike jersey is made from recycled fabrics, has a trail-specific cut with room for guards, and comes with a drop tail for coverage on the move.

The new Women's Flexair Ascent Long Sleeve Jersey takes everything you love about the booming gravel and down-country scene and kicks up the performance and technology to match that energy. Constructed using moisture-wicking fabric, it's got maximum cooling on its mind and is our most aerodynamic and closest-to-body fit - perfect for going as fast as humanly possible on any trail. The carvico rear yoke bumps up the abrasion resistance, while the lightweight bonded hem, sleeve, and neck openings reduce chaffing. Designed with lightweight, versatile, and breathable materials, and constructed with comfort top of mind, the new Ascent Collection blurs the lines between trail, adventure, and pure-XC to deliver premium performance.

The new Women's Flexair Ascent Jersey takes everything you love about the booming gravel and down-country scene and kicks up the performance and technology to match that energy. Constructed using moisture-wicking fabric, it's got maximum cooling on its mind and is our most aerodynamic and closest-to-body fit - perfect for going as fast as humanly possible on any trail. The carvico rear yoke bumps up the abrasion resistance, while the lightweight bonded hem, sleeve, and neck openings reduce chaffing. Designed with lightweight, versatile, and breathable materials, and constructed with comfort top of mind, the new Ascent Collection blurs the lines between trail, adventure, and pure-XC to deliver premium performance.

Lightweight, breathable women's MTB shorts The new Flexair Ascent Shorts with Liner take everything you love about the booming gravel and down-country scene and kick up the performance and technology to match that energy. Constructed using a mesh body material - the lightest weight and most ventilated material in our line - these shorts feature a removable liner short with a dual-density COMP chamois for maximum comfort in the saddle. With enhanced performance and TruDri® fabrics that wick away sweat to keep you cool, they fit securely and conform to your body with a stretch nylon rear yoke. On-the-fly adjustments to fit can be made easily with the proven race-ratchet closure, while zip pockets allow you to keep your essentials close and secure. Designed with lightweight, versatile, and breathable materials, and constructed with comfort top of mind, the new Ascent Collection blurs the lines between trail, adventure, and pure-XC to deliver premium performance. Specifications: - Includes a removable liner short with women's specific, dual-density COMP chamois for maximum comfort in the saddle - Dissolvable mesh body material is the lightest weight and most ventilated material in our line - Secure zip pocket stores essentials - TruDri® fabrics move sweat away from the body to keep you cool - Proven Race Ratchet closure provides a secure fit and quick on-the-fly adjustments - The stretch nylon rear yoke conforms to your body and provides a secure fit - Bonded front waist panel and leg openings reduce weight and increase comfort - Zipperless design enhances comfort while riding

The Women's Tecbase Lite Liner Shorts are an essential piece of riding gear. The dual-density chamois provides excellent comfort, while lightweight 4-way stretch mesh keeps the air moving to keep you cool on the toughest rides. Designed to integrate with Fox shorts.

With the performance of technical fabric but with the comfort of your favorite tee, the Women's Ranger Fox Head Jersey lives to keep you cool when you hit the trail. Constructed from TruDri fabrics, designed to wick sweat away from your body as you ride, this best-value performance jersey looks great both on and off the bike. It#s tailored specifically with a mountain bike fit, including a drop tail panel to offer coverage as you move around on your bike.

All the performance of technical fabric but with the comfort of your favorite tee, the Women's Ranger Moth Jersey sports a timeless Fox graphic and lives to keep you cool when you hit the trail. Constructed from TruDri fabrics, designed to wick sweat away from your body as you ride, this best-value performance jersey looks great both on and off the bike. It#s tailored specifically with a mountain bike fit, including a drop tail panel to offer coverage as you move around on your bike.

Designed by the infamous Rich Lee, the Box Two plates are injected in an impact-resistant and colorfast resin. The airflow ports are artfully sculpted to both reduce weight and drag. Each plate includes hook-and-loop closures secured in place with custom Box rivets. Did you know that these stylish creations are also the official number plate of the UCI/GSX Super Cross Series?

For Box braking we’ve limited the use of our Oversized Technology to the V area since the levers need to be minimalist and largely act as a remote for the V-Brakes. To reduce lateral deflection at the V we chose to enlarge the pivot areas and arms while tightening tolerances at their interfaces. We robbed material from unloaded sections to reinforce these zones of high stress. Not only are you going to be more efficient with brake power delivery, but you’ll also feel the instant response of deceleration. Key differences: The Box One V-Brake are the only brakes in the Box line-up to be blessed with Oversized Technology. They are also the only model to use sealed precision bearings to further reduce non-rotational movement. The 108mm long-reach brakes are excellent for BMX, mountain, city, urban and tandem bicycles using linear-pull-compatible levers. The 85-mm short reach (AKA mini-V) brakes are an excellent choice for cyclocross or drop-bar gravel bikes.

Box One Genius brake levers are the first ever to incorporate a clamp for ODI Lock-On grips. This ensures that your grips stay put while eliminating the need for an extra clamp. At roughly 50 grams, these cold-forged and CNC-machined levers beat any other on the market. Genius levers have a built-in return spring and are fully compatible with carbon handlebars. The Mid reach lever features a new design that puts it in the same reach position as the Long, but with a more BMX-specific blade for better one-finger leverage. Other features include adjustable reach, a titanium mounting bolt, and stainless steel hardware. Genius levers are designed to work with linear-pull brakes. They are excellent for BMX, mountain, city, urban, and tandem flat-bar bicycles.

DESCRIPTION The Box Three Brake is available in 85mm with short reach lever or 108mm with long reach lever. They include two-tone, dual-compound pads that feature a unique finned design that helps improve airflow. The Philips head tension screws aid installation and makes toe-in adjustments simple and easy. FEATURES - Cold Forged from 6061-T6 Aluminum - Up to 35mm of brake pad adjustment - Box Three™ Air Flow Brake Shoes w/ Dual Compound Pads - Brass bushings, Stainless Steel Hardware - Phillips head tension screw - 5mn allen key to secure cable on right arm

Box Three V-Point Brake Levers are the most versatile levers in the entire Box family. Available in either short or long reach versions, Box Three Levers are reversible, allowing users to 'flip' the lever for use on either side of the handlebar. Other features include reaching adjustment for accurate positioning and a barrel adjuster to fine-tune cable tension.

Our Box Four tier is for those people who just want less fuss! You're fond of Prime 9, but know 8 is enough, and surely 11-42T is plenty of range for an 8-speed cassette. Our derailleur still has the Limited Slip clutch but now arrives with a more compact cage. The custom 8-speed chain is built for abuse, although it's sophisticated enough to have its own Wide/narrow chainring. Push through fewer gears with a no-nonsense shifter. This combo will transport you to 1 by territory for less than $200.

Box One 7075 Alloy Chainring bolt kits include five 8.5-mm front bolts, five 6-mm front bolts, and five 5-mm rear nuts, so they will fit just about any chainring/crank combination, including those with threaded holes.

The Box One multi shifter is the only shifter on the market that comes factory stock with a hinged (and machined) clamp. It's top of the line and comes packed with other features such as a durable cast aluminum pull lever and top shell. All Prime 9 shifters take advantage of the 9-speed's inherent durability, simplicity, and reliability. Not only is the shifter mechanism joyfully simplified, but fewer shifts are needed for every mile of travel. And the best part is? Prime 9 is also terribly forgiving so you won't have to constantly adjust your set-up. Available as a multi-shift (pull several gears at once) or single-shift shifter (a sound choice for e-bikes).

The Box Two shifter is the only shifter on the market (other than our Box One) that comes factory stock with a hinged clamp. Box Two is our performance tier so this shifter still maintains the durable cast aluminum top shell but trades out the Box One's 1-piece pull-lever for a 2-piece resin and steel variant. All Prime 9 shifters take advantage of the 9-speed's inherent durability, simplicity, and reliability. Not only is the shifter mechanism joyfully simplified, but fewer shifts are needed for every mile of travel. And the best part is? Prime 9 is also terribly forgiving so you won't have to constantly adjust your set-up. Available as a multi-shift (pull several gears at once) or single-shift shifter (a sound choice for e-bikes).

Transfer Dropper Post Remote A lightweight below-the-bar design for 1x drivetrains. FOX Transfer post levers provide smooth action and reduced force, providing consistent actuation pressure to raise or lower the seat. - 22.2 1x Remote I-Spec EV

The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Remote lever sold separately - 0mm offset

FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding

Whether you’re racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. - Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability - Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards - Integrated fender and light mounts delivery maximum versatility - Clearance for tires up to 2.6” wide - 160-230 mm rotor compatible

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Kabolt Thru Axle

Is your vehicle roof looking a bit naked? Add the BaseLine FX, an advanced roof rack with integrated crossbars and towers that has no bar overhang so your vehicle will have a clean, modern aesthetic. The easy-to-adjust design means it adapts to the shape of your vehicle's roof for a secure, ready-to-load roof rack.

Key Features - Cordura® ripstop construction in high abrasion zones with TruMotion® zonal stretch panels - 850D polyester main durable body fabric - Zipper thigh vents for maximum ventilation Rugged offroad dirt bike pants with ventilation Designed to perform in the most demanding conditions, the rugged Defend Offroad Pants provide ventilation, storage, and adjustability for a precise fit on your off-the-beaten-path adventures. Designed with tough Cordura® fabrics in areas that take a beating, plus TruMotion® stretch panels, these pants provide an exceptional performance fit. For increased durability, these pants use a robust 850D polyester construction on the main body, while heat and abrasion-resistant material and leather knee panels on both legs offer further reinforcement in the most critical wear areas. Airflow and storage are enhanced with zippered thigh vents and secure cargo pockets. With their thin hem at the cuff, they’re not going to get bulky in your boots either, so you can focus on the ride. Specifications: - Cordura® Ripstop construction in high abrasion zones with TruMotion® zonal stretch panels - 850D polyester main durable body fabric - Zipper thigh vents for maximum ventilation - Knee construction made of full grain cow leather and heat abrasion-resistant material provide high durability - Thin hem at cuff to eliminate bulk in boot - Zippered cargo pockets provide storage - Strategically placed reflective trims at back yoke for high visibility Materials - Shell: 56% polyester, 37% polyamide-nylon, 5% cow leather, 2% elastane - Lining: 100% polyester

Key Features: - Our most aerodynamic and closest to body fit - Thigh and rear bib cargo pockets allow you to carry everything you'll need out on the trail - TruDri® fabrics move sweat away from the body to keep you cool - Triple density foam chamois for longer rides Lightweight, functional utility for wherever your ride takes you The Flexair Ascent Cargo Bibs blend lightweight mountain bike shorts with the fit and comfort of bibs. The shorts are constructed from our lightest weight and most ventilated material, while the nylon spandex bibs fit close to the body and feature increased abrasion resistance. TruDri® fabrics move sweat away from the body to keep you cool and dry while you shred, and the plastotex leg grippers will hold the bibs in place underneath your shorts to prevent chafing. The highlight features of the bibs are the thigh and rear cargo pockets, which allow you to carry everything you need for the trail, from snacks to your phone. Specifications: - Nylon spandex bib construction for a close-to-body fit and increased abrasion resistance - Dissolvable mesh short material is the lightest weight and most ventilated material in our line - Plastotex leg grippers hold the shorts in place and prevent chafing - Thigh and rear bib cargo pockets allow you to carry everything you'll need out on the trail - TruDri® fabrics move sweat away from the body to keep you cool - Bonded front waist panel and leg openings reduce weight and increase comfort - Triple-density foam chamois for longer rides - Shorts Inseam: 10.125" - Liner Inseam: 8" Materials - 49% polyamide nylon, 34% polyester, 17% elastane