Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools
$16.95
- Spider removal tool (EV-8550) is compatible with all e*thirteen cranks that have a removable spider. Can also be used as an installation/removal tool for e*thirteen bottom brackets
- Crank Arm Extractor tool kit (EV-8555) is compatible with e*thirteen cranks using a 1 degree spindle taper—it is not compatible with 3 degree cranks. 1 degree cranks can be identified by the laser etching on the non-drive side end of the spindle. All 2015+ e*thirteen cranks use 1 degree taper. Includes bolt, washer and extractor tool.
$19.95
8-Bit System is a multi-fonction tools that regroup all potential needs in the field
-01 and -02 : 8-Bit Multi-tool plier offer 17 functions:
- Master link plier
- Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits
- Includes a tool for clearing tubeless valve stems and a spoke wrench
- Storage for one set of quick links
-03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on
- Chain breaker
- L key has a 3mm hex forked tire plug insert
- Utility knife
- Attach to 8-bit plier with magnets and short pins
- Items for internal storage are sold separately
-04 : 8-Bit Tire Lever + Rim Dent Remover add-on
- Tire lever
- Aluminum rim dent remover is designed for use with alloy rims
- Attach to 8-bit plier with magnets and short pins
-05 : Complete Kit Including Plier and both add-on
$19.95
This adapter tool alows for installation of the crown race without damaging seals. It is compatible with the Park Tool CRS-15.2 crown race setting tube. Internal o-ring retains this adapter on the setting tube during use and storage. CNC machined from aircraft grade aluminum billet.
- Fits Park Tool CRS-15.2 crown race setting tube
- Design and manufactured in Minneapolis, MN USA
- Material - aircraft grade aluminum
$29.95
-Mminimalist, lightweight option to cover essential tool functions. It is stored at the end of an axle during rides as a multi-tool that is easy to access for quick adjustments and trailside fixes
- On one side of the handle is a 5mm hex end stepped to 6mm closer to the handle that fits into the end of an axle. The other side of the handle has a 4mm opening for two double-sided hex bits that nest on the inside of the handle via magnet
- Compatible with Wolf Tooth axles that have threaded axle bolt
- Includes: Four bits: 2, 2.5, 3, and 4mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible, hex adapter
$29.95
Flat wrench inserts from Wolf Tooth turn your flat wrench into many other tools.
- All inserts are 1 inch hex drive interface compatible
- Design and manufactured in Minneapolis, MN USA
- Nickel plated 4140 chromoly steel
$32.95
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool.
- Weight: 38.5g
- Size: 116 mm x 20 mm x 9 mm
- Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains
- Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
$34.95
- The 8-Bit Tire Lever + Multi-Tools have two functions and can be nested with the 8-Bit Pack Pliers
- Multi-tools in the 8-Bit System attach to each other with magnets and short pins
- Plastic tire lever is compatible with tubed and tubeless tires
$44.95
This lightweight chainwhip is strong enough to be your go to chainwhip, but light enough that you won't need to leave it at home when on the move.
- Compatible with any cassette up to and including 12 speed cassettes
- Design and manufactured in Minneapolis, MN USA
- 7075-T6 Aluminum
$44.95
This ultralight hex and bottom bracket wrench has a 1-inch hex at one end and an external BB cup spline at the other end. The 1-inch hex end features magnets that quickly couple with Wolf Tooth's steel hex insert tools.
- 1-inch hex drive at one end and 16-notch 44mm bottom bracket tool (or centerlock rotor tool) at the other end
- Includes the wrench only. Steel inserts are not included but can be purchased separately
- 1-inch hex drive interface compatible. Magnets inset allow quick coupling and decoupling of steel inserts
$69.95
8-Bit System is a multi-function tool that regroups all potential needs in the field
-01 and -02 : 8-Bit Multi-tool plier offer 17 functions:
- Master link plier
- Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits
- Includes a tool for clearing tubeless valve stems and a spoke wrench
- Storage for one set of quick links
-03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on
- Chain breaker
- L key has a 3mm hex forked tire plug insert
- Utility knife
- Attach to 8-bit plier with magnets and short pins
- Items for internal storage are sold separately
-04 : 8-Bit Tire Lever + Rim Dent Remover add-on
- Tire lever
- Aluminum rim dent remover is designed for use with alloy rims
- Attach to 8-bit plier with magnets and short pins
-05 : Complete Kit Including Plier and both add-on
$69.95
The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead.
- 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut
- Magnets keep all bits in place
- Ball detent swivel head helps access hard-to-reach places
- Handle doubles as breaker bar for extra torque when head is bent
- 8mm hex bit tested to over 40 Nm torque
- Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains)
- Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)
$119.95
In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter.
- 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx)
- Magnets & O-rings keep all parts in place
- Ball detent swivel head helps access hard-to-reach places
- Handle doubles as breaker bar when ball detent swivel head is bent for extra torque
- Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included)
- Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators)
- Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
- Chain & Tire Plug tool compatible with all bicycle chains including 12-speed
- Inserter tool and bacon strips plug holes in tubeless tires
- Five strips included; refills available
- Hardened steel pin for lifetime durability
- Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench
- Storage sleeves made of vibration-damping material and snug fit prevents rattling
- Durable precision-machined aluminum end caps
- Custom fit rubber flap can be trimmed to fit in smaller diameter bars
- Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately)
- Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars
$139.95
8-Bit System is a multi-fonction tools that regroup all potential needs in the field
-01 and -02 : 8-Bit Multi-tool plier offer 17 functions:
- Master link plier
- Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits
- Includes a tool for clearing tubeless valve stems and a spoke wrench
- Storage for one set of quick links
-03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on
- Chain breaker
- L key has a 3mm hex forked tire plug insert
- Utility knife
- Attach to 8-bit plier with magnets and short pins
- Items for internal storage are sold separately
-04 : 8-Bit Tire Lever + Rim Dent Remover add-on
- Tire lever
- Aluminum rim dent remover is designed for use with alloy rims
- Attach to 8-bit plier with magnets and short pins
-05 : Complete Kit Including Plier and both add-on
$144.95
The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This new tool has included options for QR and thru axle. And for simple and durable storage, the components of this tool also nest inside of the handle.
- Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.
- Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.
- Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required.
- Works on 12mm thru axle and 5mm quick release bikes
$9.50
Our 2437 open bore adapter is used to press 24x37 sealed bearings into bottom bracket cups, and direct fit frames like trek BB90. The adapter is machined with one step at 24mm ID, which fits into the center of the sealed bearing.
- Installs: 24x37 bearing
- Inner step outer diameter: 23. 8mm
- Outer diameter: 36. 8mm
- Thru hole diameter: 0. 387" (9. 8mm)
- Inner hole sized to fit 1/2" threaded rod
- Compatible with BP0006, BP0007
- Machined, red anodized aluminum
- Sold individually (2 drifts required for some installations)
$9.50
This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually
$9.50
Our 6806 open bore adapter is used to press 42x30 sealed bearings. The adapter is machined with one step at 30mm ID, which fits into the center of the sealed bearing. Common bearing size for BB30 frames and bottom brackets.
- Installs: 6806 bearing
- Inner step outer diameter: 29. 9mm
- Outer diameter: 41. 8mm
- Thickness: 7mm
- Thru hole diameter: 0. 387" (9. 8mm)
- Inner hole sized to fit 1/2" threaded rod
- Compatible BP0006, BP0007
- Machined, red anodized aluminum
- Sold individually (2 drifts required for some installations)
$9.50
Frame linkage standoff works with Wheels Mfg. bearing press handles. Acts as a spacer to allow the press handles to fully seat bearings over suspension linkages that protrude beyond the face of the bearing. - OD: 15.8mm / ID: 9.9mm - Machined aluminum - Anodized red - Sold individually
$9.50
Our GXP-LEFT open bore adapter is used to press 22x37 sealed bearings into SRAM GXP bottom bracket cups and direct fit frames like trek BB90. The adapter is machined with one step at 22mm OD, which fits into the center of the sealed bearing.
- Installs: 22x37 (GXP) bearing
- Inner step outer diameter: 21. 9mm
- Outer diameter: 36. 8mm
- Thickness: 7mm
- Thru hole diameter: 0. 387" (9. 8mm)
- Inner hole sized to fit 1/2" ACME threaded rod
- Compatible with BP0006, BP0007
- Machined, red anodized aluminum
- Sold individually
$9.50
Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step
$9.50
Wheels Manufacturing Over Axle Adapters are used for pressing your most commonly used bearing sizes into place. Each represents an excellent addition to the Press-4 Bearing Press.
- Adapters sold individually
$13.00
Precision-machined anodized aluminum designed to allow for easy adjustment of the Fox DHX2/FLOAT X2 shocks requiring a 3mm and 6mm hex wrench. This small, pocket-sized tool allows for easy trail-side adjustments.
$13.50
Pusher for Wheels Mfg sealed bearing extractors. - For use with Wheels Mfg. 1/2-inch threaded rod press handles - Part of a system that requires additional pieces to function
$18.50
Designed to press in all current wheels mfg bottom brackets! our universal bottom bracket frame
drift is designed to press all current wheels mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell inside diameters listed in the compatibility tab below. Each step is laser etched with the diameter size. Drift can also can be used as a frame bottom bracket shell sizing guide!
- Inner hole sized to fit 1/2" threaded rod. (Not for use with our Press-1 or Press-4 )
- Compatible with any other press with a 1/2" diameter rod
- Recommended for use with Wheels Mfg BP0006, BP0007
- Machined aluminum
- Anodized red
- Sold individually
We do not recommend it for use with press with a rod diameter less than 1/2". When used with a smaller rod, it is almost impossible to prevent the cups or bearings from pressing in straight.
$19.99
Shimano Direct Mount Chainring Socket
$22.05
Receiver cup sleeve for Wheels Mfg. sealed bearing extractors. Machined aluminum sleeve, anodized red. - 1/2-inch thru hole to fit over their 1/2-inch threaded rod press handles - Part of a system that requires additional pieces to function
$23.63
Receiver cup for Wheels Mfg. sealed bearing extractors. Machined aluminum cup, anodized red with 60mm OD and 52mm ID. - 1/2-inch thru hole to fit over Wheels Mfg. 1/2-inch threaded rod press handles - This receiver cup is part of a system that requires additional pieces to function
$25.00
- Heavy duty double-ended steel lockring wrench
- 10.5" long for plenty of leverage, fits most bottom bracket lockrings
$26.25
The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration. A metric scale runs along the long edges for measuring bottom bracket shell width and crank spindle lengths. Durable red anodized aluminum with laser etching. Overall size is 7" x 3" x 0.125".
The gauge can measure:
- bottom bracket width
- bottom bracket shell inner diameter
- crank spindle length
- crank spindle diameter
- bearing inner diameter
Specifications:
Measures crank spindle diameters:
22mm, 24mm, 29mm, 30mm
Measures bearing inner diameters:
22mm, 24mm, 29mm, 30mm
Measures bottom bracket shell inner diameters:
37mm, 41mm, 42mm, 46mm
Measures bottom bracket shell widths:
61mm, 68mm, 73mm, 79mm, 86.5mm, 90mm, 92mm, 95mm, 100mm, 120mm, and 132mm
Measures crank spindle lengths up to 180mm
$27.50
The Wheels Manufacturing universal bottom bracket drift presses all current Wheels Mfg bottom bracket cups into your frame or bearing cups. The adapter is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. Each step is laser etched with the diameter size. - Inner hole sized to fit 1/2" threaded rod. Not for use with Wheels Mfg PRESS-1 or PRESS-4 - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg Universal BB Press - Machined aluminum - Anodized Red - Sold individually - Drift can also be used as a frame bottom bracket shell sizing guide! Fits the following bottom bracket shell sizes: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm)
Page 1 of 29
Next page