Frames

As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly 4130 CroMoly frame, main triangle is double-butted - 1-1/8" threadless CroMoly fork - Rack, fender, and four sets of Three-Pack mounts - Disc Brake-specific - Single-position vertical rear dropout - 27.5 x 2.8” tire clearance

As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly 4130 CroMoly frame, main triangle is double-butted - 1-1/8" threadless CroMoly fork - Rack, fender, and four sets of Three-Pack mounts - Disc Brake-specific - Single-position vertical rear dropout - 27.5 x 2.8” tire clearance

Straggler is a bikepacking-inspired road/gravel bike mostly at home on pavement but ready for trail duty when called. Born on Gravel. Raised on Pavement Straggler is tuned for cross-over exploration on a wide variety of terrain conditions. It's a day-tripper and a weekender. It's a "rough road" road bike, a cyclocross bike with no pretense about racing, a utilitarian townie, a light-duty touring bike and an all-weather commuter. It's a steel gravel bicycle that thrives on the road. Think of it as a "mountain biker's road bike." If you only have room for one bike in your life, Straggler can (and should) be your one and only. Straggler's capabilities go well beyond asphalt. It also lends itself well to light touring setups. We're talking frame bags, seat bags, and "credit card touring" rather than full-blown touring. Straggler also handles our 8- and 24-Pack Racks well, so you have some heavier-duty loading options. - Accommodations for racks and fenders - Forward-exiting horizontal dropouts for singlespeed compatibility and wheelbase adjustability - Clearance for 650B x 41mm tires with fenders!

Straggler is a bikepacking-inspired road/gravel bike mostly at home on pavement but ready for trail duty when called. Born on Gravel. Raised on Pavement Straggler is tuned for cross-over exploration on a wide variety of terrain conditions. It's a day-tripper and a weekender. It's a "rough road" road bike, a cyclocross bike with no pretense about racing, a utilitarian townie, a light-duty touring bike and an all-weather commuter. It's a steel gravel bicycle that thrives on the road. Think of it as a "mountain biker's road bike." If you only have room for one bike in your life, Straggler can (and should) be your one and only. Straggler's capabilities go well beyond asphalt. It also lends itself well to light touring setups. We're talking frame bags, seat bags, and "credit card touring" rather than full-blown touring. Straggler also handles our 8- and 24-Pack Racks well, so you have some heavier-duty loading options. - Accommodations for racks and fenders - Forward-exiting horizontal dropouts for singlespeed compatibility and wheelbase adjustability - Clearance for 700c x 41mm tires with fenders!

As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly Chromoly frame, main triangle is double-butted; 1-1/8" threadless Chromoly fork - Rack, fender, and four sets of three-pack mounts - Disc brake-specific, single-position vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm (with or without fenders) or 27.5 x 2.8" tires (27.5 x 2.6" with fenders)

A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 26 x 2.1" tires with or without fenders

A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. Additionally, the 700c platform now offers clearance for 47mm tires for greater flexibility in tire options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 700c x 47 tires with or without fenders

The Grappler is Surly's dedicated drop-bar trail bike. With mountain geo designed around a comfortable, confident drop-bar hand position, it's lively and responsive on single-track, double-track, and other degraded surfaces. Ready to haul essential gear for all-day dirt rides and quick bikepacking excursions, captured thru-axles front and rear provide ideal stiffness and handling. Built around 27.5" wheels and compatible with internally geared hubs and single-speed setups, Surly's tried-and-true Gnot-Boost spacing allows riders to run 142mm or 148mm rear hubs. - 100% Surly Chromoly steel frame and fork, featuring Surly's proprietary 'Natch tubing, double-butted main triangle, 1-1/8" headtube, non-suspension corrected. - Horizontal-slotted dropout, Surly Gnot-Boost spacing. - Seat stay-mounted bottle bosses on all sizes except XS, plus three-pack mounts at the top and bottom of the down tube and stealth dropper post routing. - E.D. coated frame for increased life expectancy. - 27.5 x 2.8" tire clearance (with or without fenders).

The Grappler is Surly's dedicated drop-bar trail bike. With mountain geo designed around a comfortable, confident drop-bar hand position, it's lively and responsive on single track, double track, and other degraded surfaces. Ready to haul essential gear for all-day dirt rides and quick bikepacking excursions, captured thru-axles front and rear provide ideal stiffness and handling. Built around 27.5" wheels and compatible with internally geared hub and single-speed setups, Surly's tried-and-true Gnot-Boost spacing allows riders to run 142mm or 148mm rear hubs. - 100% Surly Chromoly steel frame and fork, featuring Surly's proprietary 'Natch tubing, double-butted main triangle, 1-1/8" headtube, non-suspension corrected. - Horizontal-slotted dropout, Surly Gnot-Boost spacing. - Seat stay mounted bottle bosses on all sizes except XS, plus three-pack mounts at the top and bottom of the down tube and stealth dropper post routing. - E.D. coated frame for increased life expectancy. - 27.5 x 2.8" tire clearance (with or without fenders).

Midnight Special is a road plus bike designed to provide comfort and speed on those all-day rides that extend well beyond fresh pavement. Midnight Special shines on pot-holed, deteriorating pavement and the occasional long stretch of gravel. Its 650B road plus tires eat up road chatter and absorb all the bumps in the road like the champion it was designed to be. When it comes to road bikes, we just want to toss a few bananas into our pockets and see where the road takes us. We seek out varied surfaces on our rides and frequently go from pavement to gravel to worse pavement. Midnight Special allows us to accomplish all of that quite comfortably. - Higher volume tires allow better fine tuning of tire pressure on varying surfaces and create a wider contact patch for increased traction - Modern road standards like flat-mount disc brakes, 12mm front and rear thru-axles, and a 44mm head tube - Clearance for 650B x 60mm or 700c x 42mm tires without fenders (650B x 50mm or 700c x 38mm with fenders)

Midnight Special is a road plus bike designed to provide comfort and speed on those all-day rides that extend well beyond fresh pavement. Midnight Special shines on pot-holed, deteriorating pavement and the occasional long stretch of gravel. Its 650B road plus tires eat up road chatter and absorb all the bumps in the road like the champion it was designed to be. When it comes to road bikes, we just want to toss a few bananas into our pockets and see where the road takes us. We seek out varied surfaces on our rides and frequently go from pavement to gravel to worse pavement. Midnight Special allows us to accomplish all of that quite comfortably. - Higher volume tires allow better fine tuning of tire pressure on varying surfaces and create a wider contact patch for increased traction - Modern road standards like flat-mount disc brakes, 12mm front and rear thru-axles, and a 44mm head tube - Clearance for 650B x 60mm or 700c x 42mm tires without fenders (650B x 50mm or 700c x 38mm with fenders)

The All-Around Fat Bike Wednesday sits in the middle of our Trail category, but don't let that fool you into thinking that's its only use. With Wednesday, we borrowed elements from some of our Trail and Touring models to create a versatile fat tire trail bike that can truly handle anything you want to attempt. If you do an equal amount of off-road touring as you do hitting trails, Wednesday's ability to play both parts equally will suit you well. Or, if you're looking for a fat bike and don't need the fattest tires on the market, Wednesday's 26 x 4.6" tire clearance is just the ticket. "Any day of the week's a great day to ride a Wednesday." - Modern mountain standards: stealth dropper post routing, 44mm headtube, suspension correction, front and rear thru-axles - Full suite of useful braze-ons: front and rear racks, multiple sets of three-pack mounts, fenders - Full-forward, short chainstay position: 26 x 3.8" tires on 80mm rims; full-rearward, longer chainstay position: 26 x 4.6" tires on an 80mm rim Specs: - Rear Dropout Configuration: Horizontal slotted with optional vertical dumpout - Rear Hub Spacing: 12 x 177mm (Surly axle included); 10 x 170mm with Surly 10/12 Adapter Washers (not included) - Front Hub Spacing: 15 x 150mm (Surly axle included) - Rear Brake: Disc - 51mm I.S. (203mm max rotor) - Front Brake: Disc - 51mm I.S. (203mm max rotor) - Head Tube: Ø44mm - Steerer Tube: Ø28.6mm (1-1/8") - Crown Race: Ø30mm (1-1/8") - Stock Headset Upper (S.H.I.S.): ZS44/28.6 - Stock Headset Lower (S.H.I.S.): EC44/30 - Front Derailleur (Clamp): High direct mount top-pull (Ø34.9mm) - Max Chainring (CL): 1x (Fat bike 170): 34T; 2x (Fat bike 170): 26/38T; 2x (Surly OD): 22/36T - Tire Clearance Frame: 26 x 4.3" (rear axle position); 26 x 3.8" (front axle position); 29 x 3.0" - Tire Clearance Fork: 26 x 5.25"; 29 x 3.0" - Rigid Fork Spec: 468 x 47mm - Max Suspension Fork Length: 511 x 51mm (Fatbike 100mm) - Bottle Mounts Frame: 2 Standard (XS - M); 3 Standard (L - XL) - Bottle Mounts Fork: 2 Three-Pack - Rack Mounts Frame: Yes (upper and lower threaded) - Rack Mounts Fork: Yes (upper, lower, and mid-blade threaded) - Fender Mounts Frame: Yes - Other Features: Internal dropper post routing compatible

Lowside is the bike that gets you across town for a quick rip on singletrack, then over to the bar for a night out. Your BMX Bike All Grown Up Lowside is like the grownup version of the bike you rode when you were a kid and still had hopes and dreams and some semblance of ambition. It's just as happy riding singletrack as it is parked outside your favorite drinking establishment. Lowside is a single speed mountain bike. Singlespeeding has been a part of Surly's DNA since day one when we launched the 1x1 Rat Ride. After a lot of Homie Fall Fests and more feats of strength than we can recall, we decided to discontinue it a couple years back. Lowside picks up right where the 1x1 left off. "Some have dubbed the Lowside the ultimate pub cruiser." - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed though) - Spec'd in alternating years with 26 x 3" or 27.5 x 2.8" tires, the Lowside remains capable of running either option

The Ogre can get you to your job during the week, then way out of town on the weekend. It’s not sluggish on pavement or gravel and can also hold its own on singletrack. Ogre brings several sensible features to the 29er platform, including horizontal slotted dropouts with Gnot-Boost spacing, a tweaked non-suspension corrected geometry, and a beefy tire clearance. - 100% Surly Chromoly steel, double-butted main triangle - TIG-welded, Horizontal slotted with derailleur hanger, Gnot-Boost spacing allows the use of 135mm QR hub, 142 x 12mm thru-axle or 148 x 12mm Boost hubs. Features Rohloff torque arm slot and threaded eyelets for fenders, racks and Surly trailer mounts - Full-length Surly Trip Guide housing line guides for derailleurs and brakes; two sets of bottle cage mounts; upper seatstay threaded barrels, mid- and low-blade fully threaded through-blade fork eyelets; threaded holes for racks, fenders and trailer mounting nuts; Rohloff OEM2 axle plate mounting slot - Disc brakes only. Disc mounts are 51mm IS. Note: rear disc brake is limited to 160mm maximum rotor diameter and requires the use of Surly caliper adaptor (included with frames and bikes) - Frame is E.D. coated for increased life expectancy - Tire clearance for 29 x 2.5" or 27.5 x 3"

The Karate Monkey frame features updated, progressive trail geometry, a new tubeset, and Surly’s Gnot-Boost rear dropout system to support multiple drivetrain and wheel size configurations. - 100% Surly 4130 chromoly steel frame and fork; double-butted main triangle and 44mm headtube - Tubeset uses the same trumpet tubes found on Instigator 2.0 frame - Adjustable rear dropouts with 145mm Gnot-Boost spacing works with 142 x 12, 148 x 12mm, and 135mm w/ 10/12 washer - Internal dropper seatpost routing - 30.9mm seat tube ID - Clearance for 29 x 2.55 or 27.5 x 3 tires

The Karate Monkey features updated, progressive trail geometry, our custom trumpet tubeset, and Surly's Gnot-Boost rear dropout system. Available in a variety of colors, with multiple drivetrain and wheel size configurations.

Karate Monkey is a highly versatile trail bike that plays the part of 29er and 27.5+ equally well. Karate Monkey delivers a resilient, lively ride on all sorts of gnarly terrain. Its frame is a highly-versatile canvas for whatever dirty masterpiece your brain cooks up. According to our computing machine (Thor) it can be set up in approximately 487 different configurations. Originally designed as a 29er (and the frame that helped spark the 29" wheel movement), the latest Karate Monkey is designed to perform just as admirably as a 27.5+ rig as well. This allows you to pick your poison — provided your poison is having a really great time while permanently donning a huge grin, of course. - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles, suspension corrected fork - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed though) - Clearance for 29" x 2.5" or 27.5" x 3" tires

As the first "plus" bike to hit the market, Krampus changed the way many people approach trail riding. It's shown people the light of how high-volume, large-diameter tires can vastly improve the ride experience. It's also done a bang-up job dispelling the myth that big tires make you slow. Krampus is kind of like the opposite of a mullet: long in the front and short in the rear. With a long toptube and compact chainstays, it takes trail-shredding abilities to the next level. A mullet may be business in the front, party in the back but Krampus makes partying its business. - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles, suspension-corrected fork - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed though) - Clearance for 29 x 3" tires

As the first "plus" bike to hit the market, Krampus changed the way many people approach trail riding. It's shown people the light of how high-volume, large-diameter tires can vastly improve the ride experience. It's also done a bang-up job dispelling the myth that big tires make you slow. Krampus is kind of like the opposite of a mullet: long in the front and short in the rear. With a long toptube and compact chainstays, it takes trail-shredding abilities to the next level. A mullet may be business in the front, party in the back but Krampus makes partying its business. - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles, suspension-corrected fork - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed though) - Clearance for 29 x 3" tires

The Sunday Darkwave frame is built out of 100% 4310 chromoly and features Sunday's signature dent-resistant wave down tube to give riders a little extra peace of mind when things don't go according to plan. It stays looking clean with refined details like an integrated seat clamp, tapered stays, and integrated chain tensioners. Removable brake hardware and gyro tabs are also available when you need them and disappear when you don't. - 100% 4130 chromoly frame - Broc Raiford signature geometry - Removable U-brake hardware and Gyro tabs - Integrated seat clamp - Wave Down Tube: Down tube dents are common with the competitor's frames and they significantly weaken the front end of your bike. The double-butted, 1.45" diameter down-tube feature Sunday's proven Wave shaping to fight denting against contact made from a rail, ledge, coping and whatever else happens to get thrown at it. - Miter Cut Top Tube: A miter-cut top tube creates a precise joint with the seat stays during welding. This increases the strength substantially over frames that use a “sandwiched” top tube at this critical junction. - Tapered Chain & Seat Stays: Both chain and seat stays taper to provide a refined and clean look to the frame while still providing strength. They are both angled on the inside for improved chain clearance and weight savings. - Hollow Dropouts with Chain Tensioners: Hollow 8mm wide dropouts are as light as a solid 5mm dropout, but over twice as strong. There is a small internal chain tensioner to hold the wheel in position and to simplify wheel removal.

Introducing Gary Young's signature Wavelength frame. With a longer rear end and top-tube options, this frame is designed for riders who love to go fast and want a more stable ride for trails and transitions. - 100% 4130 chromoly frame - Removable U-brake hardware and Gyro tabs - Wave Down Tube: Down tube dents are common with the competitor's frames and they significantly weaken the front end of your bike. The double-butted, 1.45" diameter down-tube feature Sunday's proven Wave shaping to fight denting against contact made from a rail, ledge, coping and whatever else happens to get thrown at it - Miter Cut Top Tube: A miter-cut top tube creates a precise joint with the seat stays during welding. This increases the strength substantially over frames that use a “sandwiched” top tube at this critical junction. - Tapered Chain & Seat Stays: Both chain and seat stays taper to provide a refined and clean look to the frame while still providing strength. They are both angled on the inside for improved chain clearance and weight savings - Hollow Dropouts with Chain Tensioners: Hollow 8mm wide dropouts are as light as a solid 5mm dropout, but over twice as strong. There is a small internal chain tensioner to hold the wheel in position and to simplify wheel removal

Jake Seeley's signature frame is designed to complement his progressive, technical street riding. The Street Sweeper evolves directly from Jake Seeley's original Broadcaster frame by using shorter chain stays, a steeper head tube angle, a taller bottom bracket and smaller hollow dropouts with integrated chain tensioners. Built with versatility in mind, the Street Sweeper features removable u-brake hardware and Gyro tabs. The frame's front triangle makes use of traditional round Nightshift style top and down tubes with proven internal gusseting. - 100% 4130 Chromoly Frame - Nightshift style, double-butted, top and down tubes with proven internal gusseting - Integrated seat clamp - Butted Seat Tube & Miter Cut Top Tube: The seat tube is where all three triangles of the frame meet and it is crucial to keep this tube strong - Tapered Chain & Seat Stays: Both chain and seat stays taper to provide a refined and clean look to the frame while still providing strength. The are both angled on the inside for improved chain clearance and weight savings - Hollow Dropouts with Chain Tensioners: Hollow 8mm wide dropouts are as light as a solid 5mm dropout, but over twice as strong. There is a small internal chain tensioner to hold the wheel in place as well as simplify wheel removal - Removable Brake Hardware: Refined removable brake mounts and cable channel improvements that provides benefits with or without a brake setup

Turbo Levo SL is a new, lightweight breed of eMTB that harnesses the quick and lively ride of our Stumpjumper...and adds just enough power to introduce a whole new dimension of kick ass. The top-shelf S-Works Turbo Levo SL Frameset features a carbon chassis mated to FOX Factory-level suspension. IT'S YOU... JUST GOING FASTER...AND FURTHER The Turbo Levo SL is effectively a Stumpjumper that lets you embark on ridiculously long adventures with no fear of bonking and helps you snag three laps of your favorite trail instead of just one. Looking for a ton of power and range? Check out our Levo and Kenevo models. Want a bike, on the other hand, that simply feels like you—a faster you, with the power to ride more trails, kind of you? That's Turbo Levo SL. TUNE IT TO YOUR STYLE By connecting with our Mission Control App, you can tune the SL 1.1 motor to your riding style, record rides, and monitor the battery. The motor even has a built-in power meter that transmits to any ANT+ head unit. Don't want to connect? No worries—the simple Turbo Connect Unit (TCU) on the top tube gives you all the control you need to just climb on and ride all day. - Lightweight, carbon Stumpjumper-inspired frame is pure ride quality and control. - Ultra-smooth and lightweight SL 1.1 motor doubles your pedaling power. - 150mm of rear suspension, courtesy of FOX's Factory DPX2 shock. - The Turbo Levo SL looks like a Stumpjumper and, out on the trail, feels like one too. That's no mistake. We aimed to build a Stumpjumper with a bit more boost to it and that's exactly what you get—a Sidearm chassis with just the right amount of front-to-rear stiffness and 150mm of smooth, custom-tuned FOX rear suspension. To top it all off, we constructed this Turbo Levo SL chassis entirely from our light-yet-strong FACT 11m carbon. - The lightweight SL 1.1 motor doubles your effort with as much as 240 watts of silent and powerful assistance to your pedals. The motor's responsive torque curve delivers power perfectly in-tune with your normal riding cadence and leaves no resistance when you're riding without power assistance. - Worried about running out of power? No problem. Turbo Levo SL eats up big miles and long days. And if you're looking for even more miles, our included range extender boosts your range by another 50 percent. On top of all that, our Mission Control App can handle battery management automatically, ensuring your battery will last as long as you need it to.

When we say "The Ultimate Trail Bike," we mean it—the all-new Stumpjumper is everything you could ever ask for in a trail-ripping steed. Want a bike that climbs with ease? The Stumpjumper delivers, thanks to a ground-up suspension redesign and lightest-in-class frame weight. How about something that's ready to shred when the trail turns downhill? That suspension re-design - paired with new Trail Geometry and the Rider-First Engineered frame’s perfect blend of stiffness and light weight - turns the Stumpjumper into an absolute monster descending. Point it where you want to go and let the party begin. The S-Works Stumpjumper frame is the perfect starting point for you to envision your own interpretation of the Ultimate Trail Bike. Start with our supremely light, incredibly strong, FACT 11m carbon frame. Then dress it to suit your needs, whether those needs be singletrack soul surfing or death-grip mayhem. - THE TRAIL BENCHMARK—When we set out to design the all-new Stumpjumper, we pursued some hefty goals. It had to excel on any kind of trail, for every style of rider. To achieve that, we went after serious weight reduction without sacrificing durability, a stiff, responsive chassis that still rides light and lively, geometry that improves everyone’s riding, and the best suspension kinematics we know how to design. Turns out, you can have your cake and eat it too with the new Stumpjumper. - THE SWEETEST 130MM OF TRAVEL YOU’LL EVER RIDE—We massaged the kinematics of the Stumpjumper suspension to bring out the very best all-round performance possible in a 130mm package. Countless hours of suspension lab development and field testing created a refined mid-travel ripper that eats big terrain like a gravity fed beast, handles like a dream everywhere, and climbs like it has a motor. - PROGRESSIVE GEOMETRY—The S-Sizing geometry of the new Stumpjumper hits the progressive sweet spot. It’s long, low and slack, with a short offset fork and a steeper seat tube angle. These numbers combine to make your ride more stable, more carvealicious, more comfortable climbing, more better everywhere. With FlipChip adjustability you’re able to further fine-tune your fit, ensuring that your new Stumpjumper performs flawlessly on whatever terrain you choose. - RIDER-FIRST ENGINEERED—Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight, And by light, we mean real light: 2,250 grams (S-Works, S-3 size, with rear shock). SWAT—We introduced the SWAT door on the Stumpjumper in 2016, adding room IN your frame for those “oh sh**t” necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant.

The S-Works Stumpjumper EVO is much more than just a trail bike; it’s a shred-sled built to full-send down the gnarliest trails. Featuring an all-new design, with an adjustable head tube angle, 150mm of performance tuned travel, and the adaptability of S-Sizing, this thing is an absolute ripper. The S-Works Stumpjumper EVO—get rowdy. This S-Works Stumpjumper EVO Frame is the perfect canvas to imagine your ultimate ride. Build your totally custom dream bike, make it a reality, and shred happily. - What do you get when you pair a 29-inch front wheel with a 27.5-inch rear wheel? The S-Works Stumpjumper EVO Frameset, that’s what. With all of the traction and handling benefits of a 29er, but with a smaller, more maneuverable rear wheel, this mullet setup suits a more jibby, playful style. It’s right at home at the bike park, and is a total blast to cut loose with on the trail. - All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we’ve not only improved the pedaling performance of the Stumpjumper, but we’ve made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs. - The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front. - Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight. - We introduced the SWAT™ door on the Stumpjumper in 2016, adding room IN your frame for those “oh sh**t” necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT™ Bladder, giving you an extra 22oz of water storage – the same size as a small water bottle – hidden in your downtube.

The S-Works Stumpjumper EVO is much more than just a trail bike; it's a shred-sled built to full-send down the gnarliest trails. Featuring an all-new design, with an adjustable head tube angle, 150mm of performance tuned travel, and the adaptability of S-Sizing, this thing is an absolute ripper. The S-Works Stumpjumper EVO - get rowdy. This S-Works Stumpjumper EVO Frame is the perfect canvas to imagine your ultimate ride. Build your totally custom dream bike, make it a reality, and shred happily. - All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs. - Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you're a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you'll experience the same ride traits rail-sharp cornering and balanced front and rear stiffness at the lightest-possible weight. - The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front. - We introduced the SWAT door on the Stumpjumper in 2016, adding room IN your frame for those "oh sh**t" necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT Bladder, giving you an extra 22oz of water storage, the same size as a small water bottle, hidden in your downtube.

An aerodynamic frame that was developed in the Win Tunnel? Check. Integrated water and storage options? You know it. The ultimate speed weapon to elevate your bike leg to the next level? Oh, yeah. The S-Works Shiv Module is the perfect canvas to start constructing your new triathlon speed demon. Its full FACT 11r carbon frame was developed in our very own Win Tunnel, and it's not only been aerodynamically optimized for straight-line speed, but it also features airfoils that have been optimized to limit side force in crosswinds. A bike can only be as fast as its rider, though, which is why we also developed the Control Tower fit system that let's you optimize your stack and reach numbers in order to find your most comfortable, powerful position for your desired length. Next up comes the Fuelselage Hydration System that houses a water- bladder inside of the frame, making it virtually invisible to the wind. And to go along with your water, the Fuelcell fits plenty of food and even has room for a flat kit. The best part of the Fuelselage and Fuelcell combination is that, when packed correctly, it cleans up the frame and saves up to 75 seconds when compared to a taped-up system. What are you waiting for? Your new PR awaits. - S-Works FACT 11r carbon frame is made with our highest quality construction methods and features crosswind-optimized airfoils for enhanced aerodynamics. Meanwhile, the Control Tower Fit System and Fuelselage Hydration System ensure that your fit and hydration are always optimized. - FACT Aero carbon fork utilizes our most advanced carbon construction methods in order to provide precise steering and rider input, while also improving overall aerodynamics. - Shiv carbon fiber seatpost cuts through the wind, adding a distinct aero advantage.

Ruthless Progression This totally redesigned P.Series gives riders of all sizes a jumping off point to a life on bikes. The lightweight, but tough alloy frame is designed to take all the hits and keep rolling—across all frame and wheel size options. Our approach to these robust bikes centers around delivering a simple, high-quality platform that's versatile for all riders, and packs in category-first features that make a difference to the rider. Starting with the durable lightweight alloy frame, the new P.Series stands up to the demands of dirt jump progression. Its cables are internally routed, adding to its sleek presence and tangle-free riding. • Specialized P.3, A1 Premium Alloy, 26", fully-butted tubing, dropper post compatible and 27.5" wheel compatible.

Ruthless Progression This totally redesigned P.Series gives riders of all sizes a jumping off point to a life on bikes. The lightweight, but tough alloy frame is designed to take all the hits and keep rolling—across all frame and wheel size options. Our approach to these robust bikes centers around delivering a simple, high-quality platform that's versatile for all riders, and packs in category-first features that make a difference to the rider. Starting with the durable lightweight alloy frame, the new P.Series stands up to the demands of dirt jump progression. Its cables are internally routed, adding to its sleek presence and tangle-free riding. • Specialized P.4, A1 Premium Alloy, 27.5", fully-butted tubing, dropper post compatible and 26" wheel compatible.

We’ll leave it up to you to fine-tune your fun as you see fit with the Status 140 frameset. Fast and furious, smooth and stylish, or somewhere in the middle, you know the build that fits the bill, so have at it. Whether it’s to have another go at that new line or one last pass on that feature just to make sure you got the perfect shot, the Status’s durable M5 alloy construction is designed to take any punishment you throw at it with a smile. Far from giving the Status a split personality, its mixed wheel-size design gives it a single-minded focus on fun with a 29-inch wheel up front bringing plenty of cornering traction to the table, while the short, 27.5-inch-optimized rear end whispers in your ear to whip right over that table. - With an eye on keeping maintenance to a minimum, oversized pivot bearings increase durability while a common size across all pivots makes service and replacement a breeze when that day does come around. A threaded SRAM DUB bottom bracket continues on the theme with worry-free performance. - The active, planted feel of the Status’ FSR suspension design and Fox’s DPX2 rear shock equipped with our Rx Trail Tune make for perfect friends—and plenty of benefits. Calling on a twin-tube design that allows for two separate oil pathways during compression and rebound, the DPX2 rear shock provides plenty of support for big hits while still offering enough buttery small-bump sensitivity to keep you fresh for when the style points really count.

It's dealer's choice with the Status 160 frameset, but whatever the build, a good time is more than a safe bet. But that said, the odds of you being able to keep your poker face after getting a taste of the Status 160's playful Mixed Wheel-Size Trail Geometry are awfully tall. The traction and rolling speed of a 29-inch wheel on the front and the quick-to-flick, snappy ride feel of a 27.5-inch wheel in back may sound like were hedging our bets, but we're really going all-in on fun. And, by sticking to a frame design with an emphasis on simplicity and reliability we've ensured the fun flows unfiltered and free from distractions. - With an eye on keeping maintenance to a minimum, oversized pivot bearings increase durability while a common size across all pivots makes service and replacement a breeze when that day does come around. A threaded SRAM DUB bottom bracket continues on the theme with worry-free performance. - The active, planted feel of the Status' FSR suspension design and Fox's DPX2 rear shock equipped with our Rx Trail Tune make for perfect friends—and plenty of benefits. Calling on a twin-tube design that allows for two separate oil pathways during compression and rebound, the DPX2 rear shock provides plenty of support for big hits while still offering enough buttery small-bump sensitivity to keep you fresh for when the style points really count.

The all-new Chisel has been purpose-built to tackle modern cross country trails and race courses with the utmost speed. In fact, it shares many of the same modern features as its Epic Hardtail sibling, but in a more budget-friendly package, making it the most efficient and capable alloy hardtail out there. And with this frame option, you can build your new Chisel exactly how you like. Top-end build for a durable XC shredder? Oh, yeah. Or maybe a budget-friendly one that you can upgrade later? Easy. The Chisel frame is the perfect canvas to start painting your new path to XC racing. - We asked ourselves, "How do we bring pro-level performance down to a price more riders can afford?" D'Aluisio Smartweld Technology, that's how. Smartweld allows us to create the most consistent, high-strength welds possible while taking full advantage of compliant, hydroformed alloy tubes. The result? One of the lightest alloy hardtail frames out there at 1,350g, which also features size-tuned stiffness. - The new Chisel also houses all of the modern features that you expect from an XC bike, like Progressive XC Geometry with a 68-degree headtube angle and longer reach, internal cable routing, a threaded bottom bracket, boost spacing, 30.9mm dropper post compatibility, and 1x-only drivetrains.

We'll leave it up to you to fine-tune your fun as you see fit with the Status 140 frameset. Fast and furious, smooth and stylish, or somewhere in the middle, you know the build that fits the bill, so have at it. - With an eye on keeping maintenance to a minimum, oversized pivot bearings increase durability while a common size across all pivots makes service and replacement a breeze when that day does come around. A threaded SRAM DUB bottom bracket continues on the theme with worry-free performance. - The active, planted feel of the Status's FSR suspension design and Fox's FLOAT X Performance rear shock equipped with our Rx Trail Tune make for perfect friends—and plenty of benefits. Calling on a twin-tube design that allows for two separate oil pathways during compression and rebound, the FLOAT X Performance rear shock provides plenty of support for big hits while still offering enough buttery small-bump sensitivity to keep you fresh for when the style points really count.

It's dealer's choice with the Status 160 frameset, but whatever the build, a good time is more than a safe bet. But that said, the odds of you being able to keep your poker face after getting a taste of the Status 160's playful Mixed Wheel-Size Trail Geometry are awfully tall. - With an eye on keeping maintenance to a minimum, oversized pivot bearings increase durability while a common size across all pivots makes service and replacement a breeze when that day does come around. A threaded SRAM DUB bottom bracket continues on the theme with worry-free performance. - The active, planted feel of the Status's FSR suspension design and Fox's FLOAT X Performance rear shock equipped with our Rx Trail Tune make for perfect friends—and plenty of benefits. Calling on a twin-tube design that allows for two separate oil pathways during compression and rebound, the FLOAT X Performance rear shock provides plenty of support for big hits while still offering enough buttery small-bump sensitivity to keep you fresh for when the style points really count.

Let's get something clear, the Stumpjumper EVO Alloy isn't a "normal" trail bike. It's built to get gnarly, plain and simple. Featuring the same all-new design as its carbon brethren—including an adjustable head tube angle, 150mm of performance tuned travel, the adaptability of S-Sizing, and SWAT™ Door integration—in a lightweight yet tough M5 Alloy chassis, you're going to be able to bomb down trails that you thought you couldn't touch without a full-blown DH rig. - All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs. - The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front. - Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you're a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you'll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight. - We introduced the SWAT™ door on the Stumpjumper in 2016, adding room IN your frame for those "oh sh**t" necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant.

We created the all-new Allez Sprint by cannibalizing the Tarmac SL7. We tore the Tarmac apart, and rebuilt it from alloy with our Smartweld technology. We leveraged every innovation and insight learned during its development to create the all-new Allez Sprint. Whether chasing a National title or attacking your buddies 15 minutes into an "easy" Sunday spin, we won't be offended if you mistake the Allez for a Tarmac SL7. Some may call it a carbon copy, we call it the World's First Alloy Super Bike Ready to make your dream alloy super bike a reality? Start with the all-new Allez Sprint Frameset. Equipped with a Tarmac SL7 FACT carbon fork and seatpost, it's compatible with both aero and traditional stems and bars, electronic and mechanical drivetrains, and features a no-fuss threaded bottom bracket. The rest is up to you. - The Allez Sprint is the fastest alloy road bike in history, thanks to the time its sibling, the Tarmac SL7, spent in the wind. It's details like the most complex alloy head tube we've ever made and integrated cables that make it 41 seconds faster over 40km than the previous Allez Sprint. That's a hell of a facelift. With 41 seconds, you'd have a podium picture in your Insta feed, just saying. - Whether you're launching a sprint out of the final corner or attacking from the gun like a young Italian at the Giro, the Allez Sprint, with its one-piece bottom bracket and downtube, delivers the ruthless efficiency of alloy with unprecedented stability. By balancing power at the pedals with input at the bars, the Allez Sprint keeps you fast and confident on the limit. - Dive for the winning gap, bang elbows in the final meters, dissect the most technical descents, all without feeling like you've gone ten rounds with the heavyweight champ. Dropped seat stays, and the Tarmac SL7's carbon seat post and fork make the Allez Sprint supple in the saddle and precise at the bars—all with Tarmac SL7's World Championship-proven geometry. It's as comfy as it is beautiful. Well, almost. - One innovation over any other helps us deliver the new Allez Sprint's aerodynamics, power transfer, and handling—Smartweld. Making the fastest bikes in the world out of carbon wasn't hard enough. We hydroformed the bottom bracket and down tube from a single piece of alloy, built our most complex alloy head tube ever, and then put it all together with Smartweld. It's what makes the Allez Sprint the first alloy super bike.

We created the all-new Allez Sprint by cannibalizing the Tarmac SL7. We tore the Tarmac apart, and rebuilt it from alloy with our Smartweld technology. We leveraged every innovation and insight learned during its development to create the all-new Allez Sprint. Whether chasing a National title or attacking your buddies 15 minutes into an “easy” Sunday spin, we won’t be offended if you mistake the Allez for a Tarmac SL7. Some may call it a carbon copy, we call it the World’s First Alloy Super Bike Ready to make your dream alloy super bike a reality? Start with the all-new Allez Sprint Frameset. Equipped with a Tarmac SL7 FACT carbon fork and seatpost, it’s compatible with both aero and traditional stems and bars, electronic and mechanical drivetrains, and features a no-fuss threaded bottom bracket. The rest is up to you. - The Allez Sprint is the fastest alloy road bike in history, thanks to the time its sibling, the Tarmac SL7, spent in the wind. It’s details like the most complex alloy head tube we’ve ever made and integrated cables that make it 41 seconds faster over 40km than the previous Allez Sprint. That’s a hell of a facelift. With 41 seconds, you’d have a podium picture in your Insta feed, just saying. - Whether you’re launching a sprint out of the final corner or attacking from the gun like a young Italian at the Giro, the Allez Sprint, with its one-piece bottom bracket and downtube, delivers the ruthless efficiency of alloy with unprecedented stability. By balancing power at the pedals with input at the bars, the Allez Sprint keeps you fast and confident on the limit. - Dive for the winning gap, bang elbows in the final meters, dissect the most technical descents, all without feeling like you’ve gone ten rounds with the heavyweight champ. Dropped seat stays, and the Tarmac SL7’s carbon seat post and fork make the Allez Sprint supple in the saddle and precise at the bars—all with Tarmac SL7's World Championship-proven geometry. It’s as comfy as it is beautiful. Well, almost. - One innovation over any other helps us deliver the new Allez Sprint’s aerodynamics, power transfer, and handling—Smartweld. Making the fastest bikes in the world out of carbon wasn’t hard enough. We hydroformed the bottom bracket and down tube from a single piece of alloy, built our most complex alloy head tube ever, and then put it all together with Smartweld. It’s what makes the Allez Sprint the first alloy super bike.

This thing called 'gravel riding' is still evolving, still being defined. What's next? Hop on the new Diverge Expert EVO and you tell us. It's designed to get aggressive, to push the boundaries of what we thought was possible on a gravel bike. Designed for flat bars and with geometry even more progressive then the new drop-bar Diverge, you better hang onto your flannel. We've significantly increased the reach, slackened the head tube and lowered the bottom bracket, to put you 'in' the bike for a super planted feeling. From sending technical singletrack to ripping flowing fire road descents, if you're looking for a partner to take your gravel riding to new levels, nothing's faster, more fun, or rowdier than the Diverge EVO. - Our Premium E5 Aluminum frame provides a stiff, light, and durable platform. When mated to our full carbon FACT fork, the Diverge EVO becomes a light, lively and versatile bike ready to tackle the most technical gravel and dirt as aggressively as you could wish. - Speed, control, and confidence—Future Shock 1.5 is ideal technology for the gravel rider. With 20mm of axial compliance, Future Shock 1.5 is progressively tuned specifically for gravel riding. This keeps you confident and in control, able to keep the power down and stay off the brakes over rough dirt roads and in thick loose gravel, all while keeping your hands, arms, and neck fresh. - With the Diverge EVO, we took our new progressive gravel geometry to new levels. We’ve lengthened the frame 30mm over a drop bar Diverge (Size Medium), lowered the bottom bracket, and slackened the head tube. This gives the Diverge EVO more confidence over technical terrain while keeping the cockpit comfortable with flat bars. It also allows for a short stem to make all that stability feel nimble and quick at the bars.

When we say "The Ultimate Trail Bike," we mean it'the all-new Stumpjumper is everything you could ever ask for in a trail-ripping steed. Want a bike that climbs with ease? The Stumpjumper delivers, thanks to a ground-up suspension redesign and lightest-in-class frame weight. How about something that's ready to shred when the trail turns downhill? That suspension re-design - paired with new Trail Geometry and the Rider-First Engineered frame's perfect blend of stiffness and light weight - turns the Stumpjumper into an absolute monster descending. Point it where you want to go and let the party begin. - THE TRAIL BENCHMARK - When we set out to design the all-new Stumpjumper, we pursued some hefty goals. It had to excel on any kind of trail, for every style of rider. To achieve that, we went after serious weight reduction without sacrificing durability, a stiff, responsive chassis that still rides light and lively, geometry that improves everyone's riding, and the best suspension kinematics we know how to design. Turns out, you can have your cake and eat it too with the new Stumpjumper. - THE SWEETEST 130MM OF TRAVEL YOU'LL EVER RIDE - We massaged the kinematics of the Stumpjumper suspension to bring out the very best all-round performance possible in a 130mm package. Countless hours of suspension lab development and field testing created a refined mid-travel ripper that eats big terrain like a gravity fed beast, handles like a dream everywhere, and climbs like it has a motor. - PROGRESSIVE GEOMETRY - The S-Sizing geometry of the new Stumpjumper hits the progressive sweet spot. It's long, low and slack, with a short offset fork and a steeper seat tube angle. These numbers combine to make your ride more stable, more carvealicious, more comfortable climbing, more better everywhere. With FlipChip adjustability you're able to further fine-tune your fit, ensuring that your new Stumpjumper performs flawlessly on whatever terrain you choose. - RIDER-FIRST ENGINEERED - Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you're a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you'll experience the same ride traits - rail-sharp cornering and balanced front and rear stiffness - at the lightest-possible weight, And by light, we mean real light: 2,250 grams (S-Works, S-3 size, with rear shock).

The Stumpjumper EVO is a testament to full-gas trail performance. With an all-new design, from its S-Sizing geometry with an adjustable head tube angle, to its 150mm of shred-ready travel, this thing is a full-on ripper. And the Stumpjumper EVO Frameset is the perfect starting point to build your own version of the ultimate trail bike. - All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs. - Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you're a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you'll experience the same ride traits - rail-sharp cornering and balanced front and rear stiffness - at the lightest-possible weight. - The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle - these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front. - We introduced the SWATG door on the Stumpjumper in 2016, adding room IN your frame for those 'oh sh**t' necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWATG Bladder, giving you an extra 22oz of water storage - the same size as a small water bottle - hidden in your downtube.

The Crux is the lightest gravel bike in the world, with the exceptional capability of massive tire clearance and performance gravel geometry. It's not just the ultimate expression of gravel performance, it's your one-way ticket to gravel enlightenment. - Lightest: 725g S-Works 12r and 825g 10r frames. We took the revolutionary breakthroughs that made Aethos the lightest bike ever and applied them to the Crux. The result? A gravel bike that climbs like a dream, floats over nightmarish terrain and weighs less than a full bottle in your cage. - Capable: 47c/650b x 2.1" tire clearance. More clearance means more capability. With Diverge-level tire clearance, Crux takes you anywhere you can imagine, at full gas. - Responsive: Nimble, supple, and reactive. Responsive at the pedals. Supple in the saddle. With performance gravel geometry and race-influenced fit inspired by Crux's iconic history in 'cross.

Whether your goal is to escape on gravel back roads, far from cars and crowds, or drop the hammer at the front of your favorite gravel race, no bike does it better than the new Diverge. It's quite simply the fastest, most capable - and just maybe the most fun - bike we've ever made, delivering a ride that's quick and lively under power, but stable and confidence-inspiring when the terrain gets rough. From Future Shock 2.0 and all-new gravel geometry, to internal storage and category-leading tire clearance, the new Diverge represents everything we've learned over more than 40 years of riding road, gravel, and dirt. The Diverge writes an entirely new chapter in the gravel bike category, so you can dream up entirely new rides. It's the ultimate getaway vehicle. - With a FACT 9r carbon frame, the Diverge Comp frame is incredible capable and race bike light. Pin it for your local dirt climb KOM, or grind up a giant backcountry peak, the light and lively Diverge will get you there faster. - Speed, control and confidence - Future Shock 2.0 is the ultimate technology for the gravel rider. With 20mm of axial compliance and a hydraulic damper, Future Shock 2.0 suspends the rider not the bike. This keeps you confident and in control, able to keep the power down and stay off the brakes over rough dirt roads and in thick loose gravel, all while keeping your hands, arms and neck fresh. Since Future Shock 2.0's damper is adjustable, you'll be ready for the rough stuff and efficient on smooth pavement. - We tossed gravel geometry 'status quo' out the window. The new Diverge has the most progressive geometry we've ever created for a drop bar bike, giving riders a capable and stable bike in the dirt, that still feels responsive and nimble on the road. We've increased the frame's reach, introduced a slacker head tube and a longer offset fork. All this creates incredible confidence with a planted feeling in the dirt, while spec'ing shorter stems keeps the overall cockpit length the same and the steering lively. We've kept the bike's BB low to increase stability, but high enough to utilize with 650b wheels if that's your jam. - We've given the Diverge plenty of rack mounts, including fork and top tube mounts, to ensure you can take what you need, no matter how far you plan to go, or how long you plan to stay out. - Nothing unlocks a bike's capability like tire clearance, so we gave the new Diverge a whopping 47mm of tire clearance with a 700c wheel and 2.1" with a 650b wheel. Thanks to a drive side chain stay utilizing a solid beam of carbon behind the chain rings we've created clearance without using a fragile dropped chain stay design or increasing chain stay length.

The same chassis piloted to riotous success in its very first season on the World Cup circuit, the Demo Race frameset brings 27.5/29-inch rear wheel compatibility to the fore in the search for the optimal balance of speed, traction, and maneuverability while allowing for unmatched versatility. Ohlins's TTX 22 M coil shock gives you a head start on suspension perfection, just hang your time-tested race kit before you pick up the search where we left off, and there's a good chance you'll find a few podiums along the way. - The Demo Expert M5 alloy frame is fully optimized to take advantage of the traction benefits of a 29-inch front wheel and the increased maneuverability of a 27.5-inch rear wheel while maintaining the ability to change your rear wheel size to a 29-inch to suit different terrain and riding styles with an adjustable rear end that ensures chainstay length and bottom-bracket height stay dialed no matter the hoop size. - The Ohlins TTX 22 M coil shock is designed to handle the most challenging World Cup Downhill tracks, offering external low-speed compression and rebound adjustment while the Trunnion mount offers extra bushing overlap for increased durability.

Don't get us wrong, we're all for racing. Grand Tour top steps, Classic's Monuments-they're in our DNA. But sometimes riding simply to ride, riding for the love of riding, is just what we need. And this is what the Aethos lives for. Sure, it's given nothing up to performance and happens to be the lightest frame out there, but with no compromise to style. Aethos: Billions of calculations in the pursuit of one thing, perfect ride. And with this frameset, you have the perfect canvas to begin creating your dream ride. - The Aethos frame has been designed with the perfect combination of ultimate ride feel, lightweight, and style-from accelerating up steep pitches and descending technical descents, to all-day saddle comfort on even the longest coffee rides, the Aethos hits the mark. But how, you ask? By reinventing the traditional road shape found on bikes of the past, we've subtly altered these shapes to deliver massive gains in stiffness and balance, all without affecting weight or durability. Pair that with an entirely new layup and process that we've perfected over multiple decades and you have the lightest frame out there (585 grams, S-Works, size 56cm). The Aethos is more than just a new bike, it's the first of a new breed. - A featherweight frame is useless without confidence-inspiring ride characteristics, which is why we've developed the Aethos to have the perfect balance of front and rear stiffness combined with exceptional ride quality. By studying the flexing and breathing of carbon fiber, we were able to discover groundbreaking findings about how forces flow through frames. Just a few pedal strokes and you'll realize this sublime ride sets a new standard. - Every detail, from the derailleur hangers to the fork expander plug have been designed with style, weight, and durability in mind-everything in pursuit for the perfect ride.

The Crux is the lightest gravel bike in the world, with the exceptional capability of massive tire clearance and performance gravel geometry. It’s not just the ultimate expression of gravel performance, it’s your one-way ticket to gravel enlightenment. Lightest: - 725g S-Works 12r and 825g 10r frames. We took the revolutionary breakthroughs that made Aethos the lightest bike ever and applied them to the Crux. The result? A gravel bike that climbs like a dream, floats over nightmarish terrain, and weighs less than a full bottle in your cage. Capable: - 47c/650b x 2.1” tire clearance. More clearance means more capability. With Diverge-level tire clearance, Crux takes you anywhere you can imagine, at full gas. Responsive: - Nimble, supple, and reactive. Responsive at the pedals. Supple in the saddle. With performance gravel geometry and race-influenced fit inspired by Crux's iconic history in ‘cross.

With Future Shock suspension front and rear, the new Diverge STR delivers compliance without compromise. By suspending the rider—instead of the bike—Future Shock technology increases control and efficiency while decreasing fatigue, so you'll be riding farther and faster over chunkier terrain than you believed possible. The Diverge STR does this without the weight, sluggish pedal response, and inefficiency of other suspension systems. The S-Works Diverge STR starts with our FACT 11r carbon frameset with front and rear Future Shock suspension. - The new Diverge doesn't just have gorgeous lines, it has perfect curves too. Future Shock Rear puts 30mm of rear travel in the ideal path to smooth out rough roads. Its hydraulic damping controls travel to eliminate “bobbing" under power and ensure big hits never catapult you from the saddle, all without compromising fit or pedaling efficiency. - The S-Works Diverge STR FACT 11r carbon frame is more compliant than any drop bar bike we have ever made yet adds just 100 grams compared to the S-Works Diverge frame. Never have so few grams added so much capability. Climb it, race it, or load it down with bags and gear for the long haul—Diverge STR does it all faster and smoother without any excess baggage. - By suspending the rider with damped, tunable travel—20mm front/30mm rear—Future Shock Technology absorbs bump forces to boost your control and capability while retaining the efficiency and responsiveness of a rigid frame. Because as far as power transfer goes, it is a rigid frame. Power to the pedals makes the bike jump like a scared cat. You're efficient, you're comfortable, you're in control. Your bike is light, nimble, and responsive. - Born from decades of innovation and our Smoother is Faster philosophy, Future Shock was created to develop bikes that win on cobblestones, but it's found its purest expression on gravel. It's 20mm of adjustable, damped front travel that keeps you in control and on target, all while protecting your hands, arms, and shoulders from the battering. - More capability means more confidence, more confidence means more rides, more rides mean more fun, and it all starts at the contact patch. Nothing unlocks capability like tire clearance, and we're feeling generous. 47mm on a 700c wheel and 2.1" on 650B. Diverge STR is the most capable gravel bike we've ever made, so it's the most fun. We did the math.

With Future Shock suspension front and rear, the new Diverge STR delivers compliance without compromise. By suspending the rider-instead of the bike-Future Shock technology increases control and efficiency while decreasing fatigue, so you'll be riding farther and faster over chunkier terrain than you believed possible. And the Diverge STR does this without the weight, sluggish pedal response, and inefficiency of other suspension systems. The S-Works Diverge STR starts with our FACT 11r carbon frameset with front and rear Future Shock suspension. - By suspending the rider with damped, tunable travel-20mm front/30mm rear-Future Shock Technology absorbs bump forces to boost your control and capability while retaining the efficiency and responsiveness of a rigid frame. Because as far as power transfer goes, it is a rigid frame. Power to the pedals makes the bike jump like a scared cat. You're efficient, you're comfortable, you're in control. Your bike is light, nimble, and responsive. - The new Diverge doesn't just have gorgeous lines, it has perfect curves too. Future Shock Rear puts 30mm of rear travel in the ideal path to smooth out rough road. Its hydraulic damping controls travel to eliminate "bobbing" under power and ensure big hits never catapult you from the saddle, all without compromising fit or pedaling efficiency. - Born from decades of innovation and our Smoother is Faster philosophy, Future Shock was created to develop bikes that win on cobblestones, but it's found its purest expression on gravel. It's 20mm of adjustable, damped front travel that keeps you in control and on target, all while protecting your hands, arms, and shoulders from the battering. - More capability means more confidence, more confidence means more rides, more rides mean more fun, and it all starts at the contact patch. Nothing unlocks capability like tire clearance, and we're feeling generous. 47mm on a 700c wheel and 2.1" on 650B. Diverge STR is the most capable gravel bike we've ever made, so it's the most fun. We did the math. - The S-Works Diverge STR FACT 11r carbon frame is more compliant than any drop bar bike we have ever made yet adds just 100 grams compared to the S-Works Diverge frame. Never have so few grams added so much capability. Climb it, race it, or load it down with bags and gear for the long haul-Diverge STR does it all faster and smoother without any excess baggage.

We created the endurance road category two decades ago proving that high ergonomics means high performance. Today, the new Roubaix SL8 with Future Shock 3.0 is lighter, faster, and smoother than any road bike ever made, unleashing unmatched confidence. The road may be hell below, but on Roubaix, it's always heaven above. - COMPLIANCE: Future Shock 3.0 is the star of the show, more tunable, adjustable, and durable than ever. Now, regardless of position on the bike, every rider experiences 20mm of smooth, stiction-free travel between the stem and head tube. Future Shock helps keep your hands and bars steady for a smoother ride with more control to stay fast, safe, and confident. - Our dropped clamp design exposes more seatpost to increase deflection, but "more" isn't simply better. The Pave seatpost controls that deflection for the optimal vertical compliance. Together they create 'Cobble Gobbler' technology, and when paired with the Roubaix's rigid rear triangle, deliver a smooth ride with no loss in efficiency. - The Roubaix SL8 is the smoothest road bike our Ride Science Team has ever tested-reducing impacts at the bars and saddle by 53% vs. the nearest competition. With Roubaix's Future Shock 3.0 the wheel quickly moves over the bump, while rider mass remains stable, maintaining momentum in rough terrain. Typical forks deflect backward on impact, causing a measurable loss in speed. It's a scientific fact, smoother is indeed faster. - CAPABILITY: The Roubaix pioneered endurance geometry, so you ride "IN" the bike, not "ON" the bike to relieve pressure on your hands, arms, and shoulders for capability and confidence on any road, yet it's ready to dissect a mountain decent at full gas. Snuggle up. - With tire clearance up to 38c/40mm, this endurance road machine delivers better traction than ever on rough roads and even light gravel. Thanks to lightweight, super-efficient Specialized tires, that extra tire volume and traction comes with no downsides. - Roubaix inspires really BIG days on the bike, so we've given it every mount your adventures could need- three bottle mounts, top-tube mounts, and it's even fender-ready. So, go ahead and bring it all along for the ride. - PERFORMANCE: The new Roubaix SL8 is our most aero yet, with new aero shapes from our Free Foil library and dropped seat stays. At just 825 grams, the frame is 50 grams lighter, utilizing lessons learned from the Aethos—the world's lightest production frame—and our premium Fact 12r carbon blend. Nothing in its class is faster or lighter than the Roubaix.

THINK FASTEST: The Epic World Cup is the fastest XC race bike in the world on smooth to moderately technical courses thanks to its unmatched combination of efficiency, control, and light-weight. World Champ Christopher Blevins said it best, "This thing gives me everything I could want from a hardtail, plus the control and capability of full suspension." All it took to create this speed machine was a totally integrated development approach, inventing a radical new shock, and four decades of off-road winning experience. FRAME OF REFERENCE: To deliver maximum speed through ruthlessly efficient power transfer and precision handling, our engineering team set and achieved new standards in torsional rigidity and BB stiffness. This feat required an integrated development approach that merged a structurally superior double diamond layout with its shock cradled inside the top-tube, and finished off with the most sophisticated composite layup in Specialized history. SHOCKINGLY FAST: The Specialized Ride Dynamics team conceived of and invented a revolutionary shock technology for the Epic World Cup that gives the rider the efficiency and snappy response of a hardtail PLUS the control, capability, and momentum-carrying of full suspension-all with a simple setup. Co-developed with RockShox, the SID Deluxe WCID shock utilizes a unique independently adjustable positive and negative air springs to deliver the sought-after hardtail "snap", combined with terrain-devouring forgiveness, and the ability to easily personalize set-up for a specific course or tune for rider preference and feel. Set it firm and it rides like a hardtail or open it up and you have a chunk-squashing ripper. But you aren't just limited "open and closed," the simple nature of its setup allows the rider to set on a spectrum of firm to soft. PUNCHING ABOVE ITS CATEGORY: The Epic World Cup's 75mm of rear travel delivers control and capability of a much longer travel bike. Because it's designed to be ridden at or close to topped-out, it yields the same positive travel as a 100mm travel bike set up with 25% sag. To further optimize suspension performance, the Specialized Ride Dynamics team tuned the spring-rate to be relatively flat through the mid-stroke to handle the majority of bump forces like a longer travel bike. Due to its large size, the custom Mega Jounce Bumper is an "industry first" and plays a crucial role in smoothly managing bottom-out on the biggest impacts. HAVE WE LOST OUR MINDS? SORT OF: While the new, and groundbreaking SID Deluxe WCID shock provides the unique blend of support and compliance in the rear, the BRAIN is still alive and well in the fork. Its Position-Sensitive technology allows riders to sag into the fork 15mm for a balanced ride, providing supple small bump compliance and a firm pedaling platform without the need for a remote lockout or levers to flip. THE WEIGHT IS OVER: With a frame weight of just 1,765 grams (painted with shock and all hardware), the Epic World Cup edges out the lightest of competitors. This translates to faster acceleration, more efficiently climbing, and more agile handling. And all of that adds up to speed. We achieved the featherweight and monster stiffness of the Epic WC by applying what we learned in the development of our Aethos, the lightest production road frame ever made, specifically the advanced composite layup and tube shapes. THE BIGGEST FLEX IS NO FLEX: The Epic World Cup Frameset sports the 180-gram Roval Control SL seat post, boasting peerless light-weight, stiffness, and control on the World Cup today. - The all-new Epic World Cup frame features Ride Dynamics Developed suspension technology and 75mm of optimized rear wheel travel. Thanks to its shock technology, Epic World Cup delivers unmatched pedal efficiency and is ready for the roughest descents you can throw at it–no lockout switches required. - An all-new Control SL seatpost is amongst the lightest off road seatpost in market, further shaving grams to get riders up the climbs as effortlessly as possible. - An all-new SID SL BRAIN fork provides 110mm of bump muting performance while discerning inputs from the ground or rider to provide ultimate efficiency.

Journeyer is Salsa's gateway to all-road adventures. The geometry provides comfort and confidence on any road surface. Versatile cargo carrying options extend riding range and allow for many different missions. It all comes together to create the perfect introduction to all-road riding. - 6061-T6 alloy frame - Salsa Waxwing carbon fork with mid-blade rack mounts, fender mounts, Three-Pack mounts, and internal dynamo cable routing - Flat mount brakes - Internal cable routing including stealth dropper post routing - Water, tool, and accessory mounts on frame and fork allow for longer rides - Compatible with 700c and 650b wheels and tires

Timberjack is Salsa's aggressive trail hardtail. Its progressive trail geometry is stable on descents and technical sections, while the Alternator 2.0 dropouts allow for adjustable chainstay length to dial in ride characteristics. Ample accessory mounts and dual wheel size compatibility add more versatility to the package, making Timberjack a well-rounded ripper that likes to party.

Fargo is our original drop bar mountain bike. A bit of a cult classic, it’s designed for mixed surface riders and bikepackers who want the versatility to take any route and the capability to carry everything needed when they’re out for days on end. Features: - Triple Butted Cromoly Tubeset Salsa-designed, triple-butted, and frame size-specific seamless CroMoly tubing - Firestarter 110 Fork Light, tough, and ultra-versatile, this is our carbon fork for all-terrain riding. Two sets of Three-Pack mounts on each fork leg give you room for extra water or Anything Cages, and mid-blade mounts accommodate low rider racks. Firestarter fits a wide range of tire sizes, from 27.5 x 2.8–3.0" to 29 x 2.2–3.0" - Fargo Geometry Designed as a drop bar mountain bike, optimized for fit with the Salsa Woodchipper or Cowchipper handlebars. Capable of handling everything from technical singletrack trails, two-track, gravel, and the occasional paved road. Predictable handling with or without a load. The bike to ride for multiple-surface excursions - Alternator Dropouts V1.5 A split-able version of our renowned Alternator Dropout for ultimate drivetrain versatility. Run singlespeed or geared, QR or thru-axle, freehub or Rohloff, or Gates Belt Drive. Set Alternator Dropouts all the way forward for a shorter wheelbase that results in quick and nimble handling or set back for more stability. See our Alternator Page for more info - Belt Drive Compatible Tested and certified for belt drive use - 29 x 2.2" Wheel/Tire Spec This wheel and tire size rolls fast, keeps weight down, and offers excellent maneuverability - Multiple Weelsize Versatility Fargo geometry and spacing can accommodate 27.5+, 29", and, on sizes small to x-large, 29+ making for a highly capable bike that’s ready for just about any endeavor - Rear Rack Friendly Designed for use with the Salsa Alternator Plus Rack 135/142/148

Marrakesh is Salsa's world-touring bike, designed for fully loaded, rugged exploration. It’s stable and predictable when heavily loaded, and durable enough to take on everything from the Turkish dust to mud from Thailand’s monsoon season. Starting with a Marrakesh frameset and hand-selecting the components with the help of your friendly local bike shop is probably the best way for you to create a bike that's perfect for you. After all, when you're going to spend this many hours on a bike, you need it to be just right.

Vaya is designed to handle any road surface, from pavement to gravel to dirt. Whether you’re on a fast tour or just taking your time, this all road adventure and light touring bike is a versatile machine that feels great lightly loaded or unloaded. Build this frameset into the Vaya that meets YOUR needs. The frameset is the perfect foundation for a highly capable all-road or light touring bike. Whether your focus is fast and playful for blazing around fire roads or robust and stable for off-pavement exploration, Vaya's game.

Stormchaser is Salsa's gravel bike for any and all conditions. Ample tire clearance and single speed-ready Alternator Flat Mount dropouts will see you through the muddiest rides. Suspension fork and dropper post compatibility let you get wild with your route choices.

Beargrease pairs a race-ready carbon frame with the capability of fat tires for the ultimate groomed-trail machine. Its trail geometry, dropper post, and 27.5" wheels grant you confidence in loose corners and descents and make for an all-season ripper. Frame and fork mounts for extra bottles and cargo make it easier to gear up for your long days out or even overnighters, and the high-performance XT/SLX drivetrain is the icing on the cake. For light-and-quick confidence on any terrain, Beargrease is one of the best carbon fat-tire bikes out there.

The Salsa Heyday! C Deore 12 is a carbon fat-tire bike with the versatility to go wherever your imagination takes you. The carbon-fiber frame keeps weight down — especially nice when you're hefting it over downed trees deep in the backcountry. The 26 x 4.6" tires float over snow, sand, and other soft surfaces, but you can also fit 27.5 fat and 29+ wheels and tires for other missions. A mind-blowing number of cargo and accessory mounts let you bring more than just the bare necessities, and Mukluk's geometry ensures a stable ride even when loaded. Alternator 2.0 dropouts allow for multiple drivetrain options, but the stock Shimano Deore 12-speed is the perfect place to start.

Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation's premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via Rack-Lock seat collar (sold separately) - Class 5 Vibration Reduction System (VRS) reduces fatigue caused by micro-impacts - Waxwing Deluxe carbon fork features a 12 x 100 mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, dynamo cable routing, and flat-mount brake standard - Compatible with 700c (45 mm maximum) and 650b (51 mm maximum) wheels and tires - Compatible with 1x, 2x, and electronic drivetrains - Internal sleeved cable routing, dropper post-compatible - Three water bottle mounts in the main triangle on 56–61 cm frames; two on 49–54.5 cm frames - Top tube mount for Salsa EXP Series Direct Mount Top Tube Bag and additional mount on underside of down tube - Accommodates a 40mm travel suspension fork and dropper post with internal routing (on 1x drivetrains only)

Warbird is Salsa's gravel race bike, built off years of experience racing in some of the nation’s premier gravel events. It's designed to survive and thrive on anything from the often-hazardous B-roads that make up much of the Midwest gravel scene to the fire roads that climb to the heavens on the coasts. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via Rack-Lock seat collar (sold separately) - Class 5 vibration reduction system dramatically increases comfort - Waxwing carbon fork featuring a 12 x 100mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, dynamo cable routing, and flat-mount brake standard - Full-frame internal cable routing for Di2 and mechanical brakes - Toptube bag mounts on all sizes, 3 bottle mounts on sizes 56cm and up - Clearance for 40mm travel suspension forks and internal dropper post routing (1x set-ups only) - Enhanced geometry with added clearance for up to 700c x 45mm, or 650b x 54mm (2.1") - Headset included

Warroad is Salsa’s endurance all-road bike built to perform on-road, while being fully capable of off-pavement pursuits. It’s the bike for riders who don’t define a road ride by the surfaces they travel. Endurance all-road geometry, Class 5 frame Vibration Reduction System, dual wheel-size compatibility with a wide range of tire fitments, and a variety of mounting options set the Warroad apart.