Other

- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes

- Aheadset preload adjusting bolt

- Aheadset preload adjusting bolt, cap and star nut - Bolt is hollow for cable pass-through

This Service Kit from All-City Cycles includes a derailleur hanger, axle stud, and nut. The derailleur hanger is compatible with any frame out there, but you’ll need the included axle stud and nut for mounting to an All-City frame. - Alloy construction - Replacement derailleur hanger sold separately (Part Number DP0814) - Axle Stud and Nut are compatible only with All-City Space Horse, Gorilla Monsoon, and Cosmic Stallion Titanium frames

- Service kits for regular maintenance of Fox forks

- Service kits for regular maintenance of RockShox forks

- Service kits for regular maintenance of RockShox forks

- Service kits for regular maintenance of Fox shocks
- Made in and imported from Ukraine

- Service kits for regular maintenance of RockShox shocks
- Made in and imported from Ukraine

- Seal kits for regular maintenance of most BOS rear shocks
- Made in and imported from Ukraine

- Service kits for regular maintenance of Fox shocks
- Made in and imported from Ukraine

- Service kits for regular maintenance of Fox shocks
- Made in and imported from Ukraine

- Seal kits for regular maintenance of most BOS rear shocks
- Made in and imported from Ukraine

- Service kits for RockShox Reverb, Reverb Stealth (A1, A2, B1, C1) and AXS seatposts
- Kits may include extra seals that are not required all versions of the Reverb
- Includes upgraded bushings (lower and upper), IFP and dust wipers
- Also includes schrader valve core thats rated to 800 psi (stock valve core with red seal rated to 350 psi)
- Backup rings are not included (stock rings can be reused several times)

- Service kits for regular maintenance of RockShox shocks
- Made in and imported from Ukraine

- Air can and damper service kits for Specialized AFR rear air shocks, Brain or no brain
- Includes upgraded nitrogen chamber plug (needle tool is required to fill the nitrogen chamber)
- Includes three main PTFE backup rings, one for air can, two for air piston
- Also includes Schrader valve core rated to 800 PSI, while the stock valve core is only rated to 350 psi
- Made in and imported from Ukraine

- Service kits for regular maintenance of Fox shocks
- Made in and imported from Ukraine

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

Disc Brake Adapters

Avid Hydraulic Brake Lever Parts.

• Disc brake lever clamp shifter mounting bracket - (MMX) Right Guide ULT/RSC/RS/RE/R, Level ULT/TLM/TL, Code RSC/R, DB5 Elixir 9/7/CR MAG/X0/ XX, Qty 1
• SRAM Model ID: DB-SPP-A0

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

Extruded and CNC-machined from 6061-T6 aluminum, Box Two™ Stem Spacer Kits feature a lightweight design. Weights range from 0.24 to 0.29 ounces (6.7 to 8.2 grams), depending on the size. Sold in packs of five, each set provides spacing adjustments from 1 to 20 millimeters. FEATURES - Lightweight Design - Adjustment options from 1 to 20 millimeters - Fits 1" or 1-1/8" Steerer Tubes and Standard 22.2mm Handlebars SPECIFICATIONS - Inner (Ø) 1" or 1-1/8" - Height 1mm, 3mm, 5mm, 10mm 1mm, 3mm, 5mm, 10mm - Material 6061-T6 Aluminum 6061-T6 Aluminum - Weight 6.7 grams / 0.24 ounces 8.2 grams / 0.29 ounces

Box Two™ Fixed Seat Clamps are made from the finest 6061-T6 aluminum and cold-forged for strength. They are available in multiple sizes to suit a wide variety of seat tubes and riding styles. FEATURES: - Machined Rigid Frame - Secure Fixed Design SPECIFICATIONS: - Material: 6061-T6 Aluminum - Process: Cold-Forged - Hardware: Chromoly - Finish: Anodized w/Laser-Etched Graphics Size & Weight: - 25.4mm: 7 g / 0.2oz - 31.8mm: 12 g / 0.4oz

- Ultralight, CNC-machined 6061 aluminum spacers for fine-tuning stem height - Includes one each: 3, 5, 10mm spacers and two each: 1mm spacers

Box Two Quick Release Seat Clamps are cold-forged, and CNC machined from 6061-T6 aluminum alloy. Weighing in at just 27 grams/0.95 ounces in the 31.8 size, they are as lightweight as tough. The head of the quick-release lever and the face of the clamp are given a proprietary low-friction surface treatment that ensures smooth lever action for the life of the clamp without the need for a bushing. Meets or exceeds ENM standards.

Cold-forged and CNC machined from 6061-T6 aluminum alloy, Box One Fixed Seat Clamps are tough, lightweight, and exceptionally good looking. Featuring titanium hardware and laser-etched graphics, Box One Fixed Seat Clamps are available in anodized black, blue, red, and silver.

- CNC-machined 6061-T6 aluminum with titanium hardware - Zero-friction cam surface treatment ensures smooth lever action - 31.8mm - 27g

Cold forged and fully CNC-machined from several high-strength aluminum alloys, new Box One™ Stem Locks offer peace of mind and a level of added protection against losing your front wheel and fork legs in the event of a broken steerer tube. All new Box One™ Stem Locks are backward compatible with existing Box forks and may work with forks from other manufacturers.

- 6AL-4V grade 5 aerospace titanium bolt kit for SRAM Matchmaker mounts
- Matchmaker X kit includes (1) M5x8.5mm t25 low capped head, (1) M5x10mm t25 fine thread coned button head
- AXS Discrete Clamp kit includes (2) M5x10.5mm t25 low capped head
- Trigger Discrete Clamp bolt includes (1) M5x20mm Narrow Head w/ locked on washer
- Transmission "Pod" bolt includes (1) M5x0.5x9.5 fine threads
- Transmission "Pod Bridge" kit includes (2) M5x0.5x9.5 fine threads (product reference)

- 6AL-4V grade 5 aerospace titanium caliper bolts are lighter than stock steel caliper bolts
- Kit includes (2) M5 titanium bolts (measured excluding the head)
Titanium Flat Mount Bolts

- 6AL-4V grade 5 aerospace titanium caliper bolts are lighter than stock steel caliper bolts
- Kit includes (1) each M6x35mm and M6x40mm titanium bolts and washers with alignment cups and cones for 2-bolt style adapters (measured excluding the head)
Bolt/Cup/Cone/Washer

- SRAM 8 bolt Crank Spider Bolt Kit (8 count)
- Install to 4nm per SRAM owners manual
- Threadlocker required

- Kit includes:
- Shimano Brake Clamp Bolt x 2
- Shimano Bleed Port Bolt x 2
- Shimano Brake Pad Retention Pin x 2
- 2 x Washers
- All tapered bolts

- Kit includes:
- Shimano Brake Clamp Bolt x 2
- Shimano Bleed Port Bolt x 2
- Shimano Brake Pad Retention Pin x 2
- 2 x Washers
- All tapered bolts

- Kit includes:
- Shimano Brake Clamp Bolt x 2
- Shimano Bleed Port Bolt x 2
- Shimano Brake Pad Retention Pin x 2
- 2 x Washers
- All tapered bolts

- 6AL-4V grade 5 aerospace titanium disc brake rotor bolts for Specialized E-bikes with rotor mount sensor
- Commonly found on Specialized Levo, Creo, Creo Evo, Levo SL, Kenevo, Kenevo SL, Vado, and Como
- Install to 6.2nm using blue Loctite and anti-seize behind the bolt head
- Does not include speed sensor magnet
- Includes (10) 5x10mm buttonhead with Torx broach plus (2) countersunk sensor bolts

- 6AL-4V grade 5 aerospace titanium disc brake rotor bolts
- Use blue thread locker when installing and anti-seize behind the bolt head
- Includes (12) 5x10mm buttonhead bolts with Torx broach

- Kit includes:
- TRP Evo bleed kit
- TRP pad retention bolts x 2
- TRP brake lever clamp bolt x 2
- 12 pcs (10 bolts 2 washers)
- Rubber o-rings not included

- Kit Includes:
- 4 Magura Brake Lever Clamp Bolts
- 4 Magura Pad Retention Bolts
- 2 Magura Banjo Bolts
- 2 Magura Caliper Bleed Port Bolts

- 6AL-4V grade 5 aerospace titanium bolt kit for SRAM Maven brakes (front and rear)
- Includes (2) SRAM brake lever clamp bolts, (1) Maven lever bleed port kit, (2) Maven pad retention bolts, (8) Maven caliper body bolts, (2) Maven caliper banjo bolts (SLV/ULT only, BRZ doesn't have banjo bolts)
- Due to variations in rotor size caliper mounting hardware is not included

Fits: REVIVE/REVIVE 2.0, REVIVE MAX, and DIVINE Includes: - x1, Cable clamp body (# 52) - x1, M4 Set screw (# 7)

Replacement foam rings and bottom out bumper for your REVIVE MAX dropper post. The foam ring in the lower tube of your BikeYoke dropper post is a crucial component that prevents water and dirt from entering your post too easily. Keep it dry and clean at all times so your post can breathe and replace if needed. Kit includes: - 2x foam ring - 1x bottom out bumper

Replacement foam rings and bottom out bumper for your BikeYoke dropper post. The foam ring in the lower tube of your BikeYoke dropper post is a crucial component that prevents water and dirt from entering your post too easily. Keep it dry and clean at all times so your post can breathe and replace if needed. Kit includes: - 2x foam ring - 1x bottom out bumper Fits: - REVIVE (not REVIVE MAX) - DIVINE - DIVINE SL - DIVINE SL Rascal

Our clever Splits clamp attaches our Triggy directly to the handlebar. Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on! A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look. By the way: SRAM shifter triggers can also also be attached to the handlebars using our Splits clamp.

Multi-purpose suspension grease. Special additives help prevent corrosion and seizure and keep wipers and seals smooth when using it for routine services on your BikeYoke dropper post. - Suitable for all BikeYoke dropper posts - Size: 30ml (lasts for 5+ full services)

BikeYoke Sanguine is designed specifically for the use in BikeYoke seat posts. The formula reduces friction, ensuring fast action with minimal drag even in low winter temperatures below 0°C. Special additives help keep your post's o-rings and seals smooth and reduce wear. - Suitable for all BikeYoke dropper posts - Size: 250ml (lasts for several full services)

Squeezy—not just another seat clamp. We never just want to make something, that´s already there. We want to make something different, something better. Unlike other seat clamps, Sqeezy has a collar-less design. Collars are basically just a installation aid, to prevent the clamp from sliding down the seattube, but in fact they locally stiffen up the clamp and hinder it from distributing the clamping force evenly. Squeezy acts like a thin metal band, that perfectly snuggles around the circumference of your seattube and smoothly secures your seatpost in place. - Material: AL7075-T6, fine-feed CNC finish - Titanium T-25 clamping bolt - Collar-less design for more even clamping force distribution - Three Slip-Stopp installation aids - Only 8g !

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: DIVINE

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: DIVINE SL and DIVINE SL RASCAL

An extremely nice looking full aluminum headset topcap made in one piece. Laser engraved and then black anodized for a classy black in black matte/shiny finish. - Weight: Feathery 5g

A neat little gadget, that is particularly interesting for anyone who likes to wrench on their bike. Designed like an ordinary headset spacer, the Aimy slides onto the steerer tube and has a stainless steel bolt that clamps down so that the steerer tube cannot fall through your headset, once you take off your stem. - Machined from aluminum - Fits 1-1/8" steerer tube - Thickness: 8mm - Weight: 8g

Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec EV brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers or other remotes with with your I-Spec EV Shimano brake. Our BikeYoke I-Spec EV adapters are available as "left" or "right" side for Shimano brake levers and you can also flip sides if you prefer a certain more inward or outward remote position: Compatible brakes: - Deore BL-M6100/6120 - SLX BL-M7100/7120 - XT BL-M8100/8120 - XTR BL-M9100/9120 Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS

Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec II brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers with Shimano brakes. Our BikeYoke I-Spec II adapters are available as "left" or "right" for Shimano brake levers but you can also flip sides if you prefer a more inward or outward remote position: Compatible brakes: - Deore BL-M6000 - Deore BL-501 - SLX BL-M7000 - XT BL-M8000/8020 - XTR BL-M 9000/9020 Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS

Allows the mounting of any SRAM interface compatible remote onto 31.8mm handlebar diameters. Mainly intended for dropper equipped Gravel/CX bikes.

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: REVIVE / REVIVE 2.0

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: REVIVE MAX

Service kit for 100 hr service (re-adjusting play and replacing wiper). Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing - 1x Foam ring - 1x C-clip R12