Your Search: "fox"

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Kabolt Thru Axle

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements

Precision-machined anodized aluminum designed to allow for easy adjustment of the Fox DHX2/FLOAT X2 shocks requiring a 3mm and 6mm hex wrench. This small, pocket-sized tool allows for easy trail-side adjustments.

DPX2 Damper Shaft for FOX suspension service and repair. - FOX Damper Shaft - Steel, DPX2, 2pc, 0.360 ID, 0.498 OD, 3.155 TLG, 7.875 X 2.25/2.00

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - One 264mm spoke = 6g - Nipples sold separately

Don't let the sleek lines fool you. SkyLine FX is a cutting-edge roof rack with integrated crossbars and towers that has no bar overhang and is designed to support whatever you're carrying. It gives your vehicle a clean, modern aesthetic with a seamless attachment to all of our vehicle-specific Landing Pads. PRODUCT DETAILS - Integrated tower and crossbars, for a clean visual connection to the vehicle, with no crossbar overhang - Secure, easy-to-use tower specifically designed for Vehicles with Fixed Points or Tracks - Includes aerodynamic, T-slot JetStream Black crossbars - SmartFill push-down infill for easy t-slot mount attachment - Sleek tower cover styling with matte finish, tone-on-tone black logo - Easily locks to you vehicle with our SKS system (sold separately) - Multiple bar lengths available for precision sizing on various vehicle roof widths - Uses Yakima's proven Landing Pads for attachment to vehicles with fixed points or tracks - BarBed has 12° of pitch adjustment to optimize tower position and level bars PRODUCT SPECS - Weight: 5.00 lbs. - Dimensions: L 33.50 in x W 5.00 in x H 3.50 in

Designed by the infamous Rich Lee, the Box Two plates are injected in an impact-resistant and colorfast resin. The airflow ports are artfully sculpted to both reduce weight and drag. Each plate includes hook-and-loop closures secured in place with custom Box rivets. Did you know that these stylish creations are also the official number plate of the UCI/GSX Super Cross Series?

For Box braking we’ve limited the use of our Oversized Technology to the V area since the levers need to be minimalist and largely act as a remote for the V-Brakes. To reduce lateral deflection at the V we chose to enlarge the pivot areas and arms while tightening tolerances at their interfaces. We robbed material from unloaded sections to reinforce these zones of high stress. Not only are you going to be more efficient with brake power delivery, but you’ll also feel the instant response of deceleration. Key differences: The Box One V-Brake are the only brakes in the Box line-up to be blessed with Oversized Technology. They are also the only model to use sealed precision bearings to further reduce non-rotational movement. The 108mm long-reach brakes are excellent for BMX, mountain, city, urban and tandem bicycles using linear-pull-compatible levers. The 85-mm short reach (AKA mini-V) brakes are an excellent choice for cyclocross or drop-bar gravel bikes.

Box One Genius brake levers are the first ever to incorporate a clamp for ODI Lock-On grips. This ensures that your grips stay put while eliminating the need for an extra clamp. At roughly 50 grams, these cold-forged and CNC-machined levers beat any other on the market. Genius levers have a built-in return spring and are fully compatible with carbon handlebars. The Mid reach lever features a new design that puts it in the same reach position as the Long, but with a more BMX-specific blade for better one-finger leverage. Other features include adjustable reach, a titanium mounting bolt, and stainless steel hardware. Genius levers are designed to work with linear-pull brakes. They are excellent for BMX, mountain, city, urban, and tandem flat-bar bicycles.

DESCRIPTION The Box Three Brake is available in 85mm with short reach lever or 108mm with long reach lever. They include two-tone, dual-compound pads that feature a unique finned design that helps improve airflow. The Philips head tension screws aid installation and makes toe-in adjustments simple and easy. FEATURES - Cold Forged from 6061-T6 Aluminum - Up to 35mm of brake pad adjustment - Box Three™ Air Flow Brake Shoes w/ Dual Compound Pads - Brass bushings, Stainless Steel Hardware - Phillips head tension screw - 5mn allen key to secure cable on right arm

Box Three V-Point Brake Levers are the most versatile levers in the entire Box family. Available in either short or long reach versions, Box Three Levers are reversible, allowing users to 'flip' the lever for use on either side of the handlebar. Other features include reaching adjustment for accurate positioning and a barrel adjuster to fine-tune cable tension.

Our Box Four tier is for those people who just want less fuss! You're fond of Prime 9, but know 8 is enough, and surely 11-42T is plenty of range for an 8-speed cassette. Our derailleur still has the Limited Slip clutch but now arrives with a more compact cage. The custom 8-speed chain is built for abuse, although it's sophisticated enough to have its own Wide/narrow chainring. Push through fewer gears with a no-nonsense shifter. This combo will transport you to 1 by territory for less than $200.

Box One 7075 Alloy Chainring bolt kits include five 8.5-mm front bolts, five 6-mm front bolts, and five 5-mm rear nuts, so they will fit just about any chainring/crank combination, including those with threaded holes.

The Box One multi shifter is the only shifter on the market that comes factory stock with a hinged (and machined) clamp. It's top of the line and comes packed with other features such as a durable cast aluminum pull lever and top shell. All Prime 9 shifters take advantage of the 9-speed's inherent durability, simplicity, and reliability. Not only is the shifter mechanism joyfully simplified, but fewer shifts are needed for every mile of travel. And the best part is? Prime 9 is also terribly forgiving so you won't have to constantly adjust your set-up. Available as a multi-shift (pull several gears at once) or single-shift shifter (a sound choice for e-bikes).

The Box Two shifter is the only shifter on the market (other than our Box One) that comes factory stock with a hinged clamp. Box Two is our performance tier so this shifter still maintains the durable cast aluminum top shell but trades out the Box One's 1-piece pull-lever for a 2-piece resin and steel variant. All Prime 9 shifters take advantage of the 9-speed's inherent durability, simplicity, and reliability. Not only is the shifter mechanism joyfully simplified, but fewer shifts are needed for every mile of travel. And the best part is? Prime 9 is also terribly forgiving so you won't have to constantly adjust your set-up. Available as a multi-shift (pull several gears at once) or single-shift shifter (a sound choice for e-bikes).

Transfer Dropper Post Remote A lightweight below-the-bar design for 1x drivetrains. FOX Transfer post levers provide smooth action and reduced force, providing consistent actuation pressure to raise or lower the seat. - 22.2 1x Remote I-Spec EV

The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Remote lever sold separately - 0mm offset

FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding

Whether you’re racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. - Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability - Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards - Integrated fender and light mounts delivery maximum versatility - Clearance for tires up to 2.6” wide - 160-230 mm rotor compatible

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Kabolt Thru Axle

Is your vehicle roof looking a bit naked? Add the BaseLine FX, an advanced roof rack with integrated crossbars and towers that has no bar overhang so your vehicle will have a clean, modern aesthetic. The easy-to-adjust design means it adapts to the shape of your vehicle's roof for a secure, ready-to-load roof rack.

Key Features - Cordura® ripstop construction in high abrasion zones with TruMotion® zonal stretch panels - 850D polyester main durable body fabric - Zipper thigh vents for maximum ventilation Rugged offroad dirt bike pants with ventilation Designed to perform in the most demanding conditions, the rugged Defend Offroad Pants provide ventilation, storage, and adjustability for a precise fit on your off-the-beaten-path adventures. Designed with tough Cordura® fabrics in areas that take a beating, plus TruMotion® stretch panels, these pants provide an exceptional performance fit. For increased durability, these pants use a robust 850D polyester construction on the main body, while heat and abrasion-resistant material and leather knee panels on both legs offer further reinforcement in the most critical wear areas. Airflow and storage are enhanced with zippered thigh vents and secure cargo pockets. With their thin hem at the cuff, they’re not going to get bulky in your boots either, so you can focus on the ride. Specifications: - Cordura® Ripstop construction in high abrasion zones with TruMotion® zonal stretch panels - 850D polyester main durable body fabric - Zipper thigh vents for maximum ventilation - Knee construction made of full grain cow leather and heat abrasion-resistant material provide high durability - Thin hem at cuff to eliminate bulk in boot - Zippered cargo pockets provide storage - Strategically placed reflective trims at back yoke for high visibility Materials - Shell: 56% polyester, 37% polyamide-nylon, 5% cow leather, 2% elastane - Lining: 100% polyester

Key Features: - CE Level 1 certified - EN 13594:2015 - Perforated goatskin leather top durability - Touch screen compatible Comfortable and rugged gloves that protect from impact The premium D3O® knuckle guard on the stretch nylon top of the Bomber LT Gloves offers durability and impact benefits as you encounter stray trail hazards. Combined with a streamlined and form-fitting build to maximize comfort, they deliver an excellent fit and feel with a Clarino® palm for confident bar control. The stretch nylon finger gussets - the material between the fingers - increase airflow and dexterity, while each fingertip features a silicone print to boost lever grip. Specifications: - Compression-molded neoprene cuff with hook and loop closure for a secure fit - Single-layer perforated Clarino® palm - Stretch nylon top-of-hand with premium D3O® knuckle guard - Stretch nylon finger gussets increase airflow and dexterity - Silicone print at fingertips for lever grip

Warmth and durability, right from the first wear. How do you say you like getting things done without saying you like to get things done? By wearing the Women’s Source Overalls. Made from durable stretch twill, these overalls are built for whatever task you have in front of you, with that classic bib-and-brace look plus roomy mobility that won’t hinder your performance. Instant classic. Key Features - Soft and flexible stretch twill for instant comfort - Front chest pocket and two hand pockets for holding essentials - Antique-finished hardware for a refined look Specifications - Stretch twill outer has a soft, supple texture with flexibility, making it a joy to wear right from the start - Metal side waist shank buttons - Metal overall buckle and slider to ensure a great fit - Front chest pocket and two hand pockets for holding essentials - Antique-finished hardware for a refined look

Exceptional fit and lightweight feel. Feel the bars like never before. Flexair Gloves are minimalist, low-profile gloves with an exceptional fit and lightweight feel. The stretch mesh finger gussets (the fabric between your fingers) increase flexibility and help channel air through the glove for superior comfort. The Flexair glove also features a conductive thread on the thumb and index finger so you can use your phone without removing your gloves. Key Features - Low-profile cuff is like wearing nothing at all - Lightweight back-of-hand materials for a close fit and exceptional breathability - Conductive Clarino® palm for touch screen compatibility

Key Features: - TruDri® fabric keep you dry and comfortable - Tailored bike-specific cut - Durable stretch woven sleeve paneling improves abrasion resistance - Vented mesh underarm and back panels for enhanced breathability and airflow Take it offroad with this durable dirt bike jersey Hit those dirt backroads with confidence and style in the Defend Offroad Jersey. This rugged jersey pairs a moisture-wicking main body fabric with durable stretch woven sleeves for protection as you rip around the boonies. Featuring smart fabrics and construction that'll help you outride the elements while you're out there exploring, the main body of the jersey utilizes TruDri® fabric to wick sweat away from your body as you ride and provides a soft, lightweight fit to keep you feeling fresh. Our Rider Attack Position™ (RAP) construction is tailored specifically with articulated sleeves to optimize comfort and create a natural riding position. Breathable, vented mesh underarms and back panels ensure there's plenty of airflow on your next adventure, while the durable, stretch-woven sleeve panels improve abrasion resistance. Rounding out the features is a drop tail to keep you tucked in and looking your best. Specifications: - TruDri® moisture-wicking main body provides a soft, lightweight fit while moving sweat away from the body to keep you dry - Articulated sleeves create natural Rider Attack Position (RAP) ™ for improved ergonomic fit on the bike - Durable stretch woven sleeve paneling improves abrasion resistance - Vented mesh underarm and back panels for enhanced breathability and airflow - Bonded collar design provides superior comfort - Drop-tail design keeps jersey tucked in pants - Sublimated graphics for a rich, durable, and long-lasting aesthetic Materials: - 45% polyester, 29% polyamide nylon, 21% lyocell, 5% elastane

Key Features: - Drirelease® main body wicks moisture and dries four times faster than cotton - Articulated sleeves create natural Rider Attack Position (RAP™) for improved ergonomic fit on the bike - Durable stretch woven sleeve paneling improves abrasion resistance The best value mx jersey in performance and comfort Ranger is all about versatility and the Ranger Offroad Jersey puts sweat management front and center, meaning you can ride longer and in greater comfort. The drirelease® moisture-wicking main body fabric dries four times faster than cotton, keeping the sweat off you as you lay down the miles. Pair that with durable woven sleeves the jersey delivers true comfort in all riding conditions. Fit and mobility are assured, thanks to the articulated sleeves, creating a natural Rider Attack Position (RAP™) for an improved ergonomic fit on the bike. The paneling on the sleeves ratchets up the abrasion resistance of the garment, while the athletic collar design gives you an added level of comfort. With its drop tail design, this Ranger Offroad Jersey tucks neatly into the back of your moto pants and is designed to stay there throughout the ride. Specifications: - Drirelease® main body wicks moisture and dries four times faster than cotton - Articulated sleeves create natural Rider Attack Position (RAP) ™ for improved ergonomic fit on the bike - Durable stretch woven sleeve paneling improves abrasion resistance - Athletic collar design for comfort - Drop-tail design keeps jersey tucked in pants - Sublimated and/or dyed graphics for a rich, durable, and long-lasting aesthetic Materials: - 86% polyester, 10% cotton, 4% elastane

Key Features: - 10k/10k material with fully taped seams - DWR coating adds a layer of protection from moisture, dirt, and debris - Two zippered hand pockets to store essentials Lightweight protection for your ride The Flexair Lite Jacket brings lightweight protection to your ride and is particularly suited for changing or unpredictable conditions. Made with 10K/10K material with fully taped seams to stop the water from getting in, plus a DWR coating to shed moisture, dirt, and debris, this jacket is ready to keep those elements away from you. With two zip pockets to store your ride essentials, plus a helmet-compatible hood and element-busting adjustment features to make the fit even more secure and keep the jacket venting heat, this is a go-to for when the weather turns on the trail. Specifications: - 10k/10k material with fully taped seams - DWR coating adds a layer of protection from moisture, dirt, and debris - Two zippered hand pockets to store essentials - Reflective logos for increased visibility at night - Laser perforated rear vents to exhaust heat - Ride-fit hood built to go over your helmet and keep the rain out - Adjustable pull cord hem to keep the elements out Materials: - Shell: 100% polyester - Back 100% polyester

Key Features: - Packable to carry and store when not in use - Fully seam sealed for a watertight barrier - 2.5 layer ensures excellent water resistance and breathability Packable rain jacket offering unrivaled convenience for unpredictable weather Be prepared for any weather condition, at moments notice, with the Ranger O.R. Packable Rain Jacket. This waterproof jacket is designed to keep you dry and comfortable during rainy rides or outdoor adventures. Specifications: - DWR treated 2.5 layer main body fabric with 5K/5K waterproof/breathable membrane - Fully seam sealed construction keeps out water - Shock cord adjuster at bottom hem for secure fit - Jacket fully packable into the wearers left pocket with bungee adjust to pack tightly - Shock cord adjuster at lower collar as well as a hood opening for a secure fit Materials: - 100% polyester

The Box Two Front Top is a modern 1 inch by 22.2mm stem designed specifically for BMX racing. Box Two Top Load stem bodies are cold-forged and CNC-machined from the highest quality 6061-T6 aluminum. The lightweight front clamps are cold-forged and CNC-machined for increased stiffness and strength. -Material: 6061-T6 Aluminum -Process: Cold-Forged -Hardware: Chromoly Clamping Bolts -Finish: Anodized w/Laser-Etched Graphics Weight: -40mm: 138 g / 4.9 oz -45mm: 150 g / 5.3 oz