Your Search: "fox"

A Chino Short Built For Mobility And Comfort The Teton Chino Short uses a durable stretch cotton/nylon main material with a DWR coating for an excellent combination of utility and style. The integrated nylon web belt provides a secure fit and keeps the shorts in place no matter where your adventure takes you. Features - Soft stretch cotton/nylon - Convenient elastic pull-on waistband for added comfort - Integrated nylon web belt with slide adjuster for a secure fit - Zippered back welt pocket for secure storage - Internal knife pocket - Interior gusset for extra mobility - Outseam: 22" Fabric - 63% cotton / 33% Nylon / 4% Elastane, 190g

Technical performance that works on and off the bike.

A lightweight, breathable merino wool sock designed for all-day riding comfort. - Mesh zones provide added breathability - Compression arch support for superior fit and comfort - Rib knit upper won’t slide down when the trail gets rough - Flat-stitch toe construction offers improved comfort - 57% Merino Wool/30% Polyamide Nylon/9% Polyester/4% Elastane

Ultralight MTB Shorts For Maximum Comfort In Warm Conditions The Ranger Lite Short is the ultimate combination of trail-ready performance and a classic, casual, inspired look. The technical stretch fabric is lightweight and offers excellent mobility while riding. The 12" inseam provides sufficient coverage without being too long for efficient pedaling. This essential style is finished up with a traditional snap and two functional hand pockets to keep your essential items at the ready both on the bike and off. Features - Removable liner with dual-density chamois for improved saddle comfort - Technical stretch fabric is lightweight and moves with you - Snap closure for casual style and performance - Two hand pockets for style off the bike - Screenprint Fox Head - Inseam 12" Construction - Shell: 94% nylon / 6% elastane - Lining: 90% polyester / 10% spandex

A Technical Mountain Bike Short That Works On And Off The Bike The Ranger MTB Shorts pack mountain-bike-specific technology into a casually styled short that performs both on and off the bike. The stretch Ripstop fabric ensures maximum performance and superior durability. The waist adjusters are easy to adjust and extremely comfortable. The inner waistband features TruDri technology to move moisture away from your skin and keeps you cooler and drier. Features - Removable liner with dual-density chamois for improved saddle comfort - Stretch ripstop fabric maximizes performance on every ride - Goggle-strap-inspired low-profile waist-adjustment system ensures a perfect fit - TruDri-lined waistband moves sweat and moisture away from the body keeping you comfortable and dry - Secured zip pocket to stash everything you need for a ride - Durable Water Repellent finish sheds moisture, dirt, and debris - Sublimated camo print, Fox Head screen print - Inseam: 12" Construction - Shell: 57% polyamide nylon / 38% polyester / 5% elastane - Lining: 83% polyester / 17% elastane

We created the all-new Allez Sprint by cannibalizing the Tarmac SL7. We tore the Tarmac apart, and rebuilt it from alloy with our Smartweld technology. We leveraged every innovation and insight learned during its development to create the all-new Allez Sprint. Whether chasing a National title or attacking your buddies 15 minutes into an “easy” Sunday spin, we won’t be offended if you mistake the Allez for a Tarmac SL7. Some may call it a carbon copy, we call it the World’s First Alloy Super Bike Ready to make your dream alloy super bike a reality? Start with the all-new Allez Sprint Frameset. Equipped with a Tarmac SL7 FACT carbon fork and seatpost, it’s compatible with both aero and traditional stems and bars, electronic and mechanical drivetrains, and features a no-fuss threaded bottom bracket. The rest is up to you. - The Allez Sprint is the fastest alloy road bike in history, thanks to the time its sibling, the Tarmac SL7, spent in the wind. It’s details like the most complex alloy head tube we’ve ever made and integrated cables that make it 41 seconds faster over 40km than the previous Allez Sprint. That’s a hell of a facelift. With 41 seconds, you’d have a podium picture in your Insta feed, just saying. - Whether you’re launching a sprint out of the final corner or attacking from the gun like a young Italian at the Giro, the Allez Sprint, with its one-piece bottom bracket and downtube, delivers the ruthless efficiency of alloy with unprecedented stability. By balancing power at the pedals with input at the bars, the Allez Sprint keeps you fast and confident on the limit. - Dive for the winning gap, bang elbows in the final meters, dissect the most technical descents, all without feeling like you’ve gone ten rounds with the heavyweight champ. Dropped seat stays, and the Tarmac SL7’s carbon seat post and fork make the Allez Sprint supple in the saddle and precise at the bars—all with Tarmac SL7's World Championship-proven geometry. It’s as comfy as it is beautiful. Well, almost. - One innovation over any other helps us deliver the new Allez Sprint’s aerodynamics, power transfer, and handling—Smartweld. Making the fastest bikes in the world out of carbon wasn’t hard enough. We hydroformed the bottom bracket and down tube from a single piece of alloy, built our most complex alloy head tube ever, and then put it all together with Smartweld. It’s what makes the Allez Sprint the first alloy super bike.

Technical performance that works on and off the bike.

Our Best-Selling Mountain Bike Glove With Touch Screen Compatibility The Ranger Gloves are known for offering performance and quality that is typically only found in much more expensive gloves. A yearly best-seller, this versatile mountain bike glove works well in almost any discipline. The Ranger Glove continues to set the standard for performance, fit, and value in an affordable and great-looking MTB glove. - Compression-molded cuff for a secure fit - Absorbent micro-suede thumb - TruGel strategically placed gel palm protection - Touchscreen compatibility - Screen print artwork - Hook-and-loop wrist closure style Materials - 68% polyamide nylon, 14% polyurethane, 10% polyester, 5% elastane, 3% polyvinyl chloride (PCV)

- Cold-forged, CNC-machined 6061-T6 aluminum with built-in return spring - Clamp integrates with ODI Lock-On grips - 50g

- Superlight co-molded nylon shell and carbon fiber seatpost specifically for BMX Race - Large saddle has a 27.2 seatpost, while the small has a 22.2 post

The Ranger Water Glove is designed with a 100% waterproof top hand fabric and an Ax Suede waterproof palm - the perfect combination to keep your digits warm and dry in cold weather conditions. On top of that, the touch screen compatibility keeps you connected throughout your ride, so you can look up a warm coffee shop when the riding is done. - Slip on design - Durable Water Repellent finish sheds moisture, dirt, and debris - Conductive thread at index finger and thumb for touchscreen compatibility - Screen printed logos - 100% polyester waterproof top hand fabric - Ax Suede fleece waterproof palm

The Under Stem Mount allows riders to secure a Shimano Di2 Junction Box to their bike quickly and easily without the need for zip ties, duct tape, or other unreliable attachments. - Lightweight alloy headset spacer with nylon body (9g) - Compatible only with Shimano Di2 Junction Box - 95mm length, 44mm width, 6mm height - 6 Degree angle

The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Remote lever sold separately - 0mm offset

Precision-machined anodized aluminum designed to allow for easy adjustment of the Fox DHX2/FLOAT X2 shocks requiring a 3mm and 6mm hex wrench. This small, pocket-sized tool allows for easy trail-side adjustments.

FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Kabolt Thru Axle

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Kabolt Thru Axle

Transfer Dropper Post Remote A lightweight below-the-bar design for 1x drivetrains. FOX Transfer post levers provide smooth action and reduced force, providing consistent actuation pressure to raise or lower the seat. - 22.2 1x Remote I-Spec EV

Designed by the infamous Rich Lee, the Box Two plates are injected in an impact-resistant and colorfast resin. The airflow ports are artfully sculpted to both reduce weight and drag. Each plate includes hook-and-loop closures secured in place with custom Box rivets. Did you know that these stylish creations are also the official number plate of the UCI/GSX Super Cross Series?

For Box braking we’ve limited the use of our Oversized Technology to the V area since the levers need to be minimalist and largely act as a remote for the V-Brakes. To reduce lateral deflection at the V we chose to enlarge the pivot areas and arms while tightening tolerances at their interfaces. We robbed material from unloaded sections to reinforce these zones of high stress. Not only are you going to be more efficient with brake power delivery, but you’ll also feel the instant response of deceleration. Key differences: The Box One V-Brake are the only brakes in the Box line-up to be blessed with Oversized Technology. They are also the only model to use sealed precision bearings to further reduce non-rotational movement. The 108mm long-reach brakes are excellent for BMX, mountain, city, urban and tandem bicycles using linear-pull-compatible levers. The 85-mm short reach (AKA mini-V) brakes are an excellent choice for cyclocross or drop-bar gravel bikes.

Box One Genius brake levers are the first ever to incorporate a clamp for ODI Lock-On grips. This ensures that your grips stay put while eliminating the need for an extra clamp. At roughly 50 grams, these cold-forged and CNC-machined levers beat any other on the market. Genius levers have a built-in return spring and are fully compatible with carbon handlebars. The Mid reach lever features a new design that puts it in the same reach position as the Long, but with a more BMX-specific blade for better one-finger leverage. Other features include adjustable reach, a titanium mounting bolt, and stainless steel hardware. Genius levers are designed to work with linear-pull brakes. They are excellent for BMX, mountain, city, urban, and tandem flat-bar bicycles.

DESCRIPTION The Box Three Brake is available in 85mm with short reach lever or 108mm with long reach lever. They include two-tone, dual-compound pads that feature a unique finned design that helps improve airflow. The Philips head tension screws aid installation and makes toe-in adjustments simple and easy. FEATURES - Cold Forged from 6061-T6 Aluminum - Up to 35mm of brake pad adjustment - Box Three™ Air Flow Brake Shoes w/ Dual Compound Pads - Brass bushings, Stainless Steel Hardware - Phillips head tension screw - 5mn allen key to secure cable on right arm

Box Three V-Point Brake Levers are the most versatile levers in the entire Box family. Available in either short or long reach versions, Box Three Levers are reversible, allowing users to 'flip' the lever for use on either side of the handlebar. Other features include reaching adjustment for accurate positioning and a barrel adjuster to fine-tune cable tension.

Our Box Four tier is for those people who just want less fuss! You're fond of Prime 9, but know 8 is enough, and surely 11-42T is plenty of range for an 8-speed cassette. Our derailleur still has the Limited Slip clutch but now arrives with a more compact cage. The custom 8-speed chain is built for abuse, although it's sophisticated enough to have its own Wide/narrow chainring. Push through fewer gears with a no-nonsense shifter. This combo will transport you to 1 by territory for less than $200.

Box One 7075 Alloy Chainring bolt kits include five 8.5-mm front bolts, five 6-mm front bolts, and five 5-mm rear nuts, so they will fit just about any chainring/crank combination, including those with threaded holes.

The Box One multi shifter is the only shifter on the market that comes factory stock with a hinged (and machined) clamp. It's top of the line and comes packed with other features such as a durable cast aluminum pull lever and top shell. All Prime 9 shifters take advantage of the 9-speed's inherent durability, simplicity, and reliability. Not only is the shifter mechanism joyfully simplified, but fewer shifts are needed for every mile of travel. And the best part is? Prime 9 is also terribly forgiving so you won't have to constantly adjust your set-up. Available as a multi-shift (pull several gears at once) or single-shift shifter (a sound choice for e-bikes).

The Box Two shifter is the only shifter on the market (other than our Box One) that comes factory stock with a hinged clamp. Box Two is our performance tier so this shifter still maintains the durable cast aluminum top shell but trades out the Box One's 1-piece pull-lever for a 2-piece resin and steel variant. All Prime 9 shifters take advantage of the 9-speed's inherent durability, simplicity, and reliability. Not only is the shifter mechanism joyfully simplified, but fewer shifts are needed for every mile of travel. And the best part is? Prime 9 is also terribly forgiving so you won't have to constantly adjust your set-up. Available as a multi-shift (pull several gears at once) or single-shift shifter (a sound choice for e-bikes).

Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Black anodized upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT GRIP damper and FLOAT air spring - Performance Series black-on-black graphics package

Whether you’re racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. - Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability - Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards - Integrated fender and light mounts delivery maximum versatility - Clearance for tires up to 2.6” wide - 160-230 mm rotor compatible

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements